| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| overall dimensions per single armchair | 900 x 850 x 900 mm | |
|---|---|---|
| seat height from floor | 450 mm | |
| seat width between armrests | 580 mm | |
| seat depth from front edge to backrest | 550 mm | |
| backrest height above seat surface | 450 mm | |
| armrest height above seat surface | 200 mm | |
| armrest width (wooden top surface) | 120 mm | |
| base clearance under seat frame | 120 mm | |
| matching side table dimensions (per unit) | 600 x 400 x 550 mm | |
| seat cushion thickness | 120 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| net weight per single armchair | 45 kg | |
|---|---|---|
| static seat load capacity | 150 kg | |
| seat foam density | 45 kg/m³ | |
| seat foam rebound rate | 45% | |
| backrest foam thickness | 80 mm | |
| recommended seating capacity per chair | 1 person | |
| upholstery abrasion resistance | 50000 cycles | |
| seam stitch pitch | 30 mm | |
| wood finish scratch resistance | 2H | |
| suggested warranty period for commercial use | 5 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| seat and backrest outer upholstery | Light cream PU faux leather | |
|---|---|---|
| seat and backrest padding | High-density polyurethane foam | |
| armrest top and frame trim | Dark walnut-stained solid wood | |
| internal structural frame | Kiln-dried solid hardwood frame | |
| chair base plinth | Upholstery-covered wood base with dark wood bottom trim | |
| frame decorative inlay trim | Dark solid wood geometric moulding | |
| matching side table tabletop | Dark walnut-stained solid wood panel | |
| matching side table frame | Solid wood leg and support frame | |
| upholstery substrate | 12mm thick multilayer plywood under foam | |
| matching side table support frame | Solid wood leg and cross-brace frame, 40mm leg diameter | |
| upholstery backing substrate | 12mm thick multilayer birch plywood under foam | |
| floor contact pads | 5mm thick non-slip felt pads, 6 pads per chair base |
Adjustment / rotation / tilt / mobility / storage features
| seating posture support | Fixed upright seat and back angle of 100 degrees | |
|---|---|---|
| armrest utility function | Wide flat wooden armrest tops for placing small personal items or supporting arms during long meetings | |
| arrangement flexibility | Individual modular units can be arranged in linear rows around perimeter of reception rooms, paired with matching side tables between seats | |
| surface maintenance | Stain-repellent upholstery surface that can be wiped clean with a damp cloth for daily upkeep | |
| noise reduction feet | Anti-slip silent felt pads under base contact points to protect floor surfaces and eliminate movement noise | |
| side table utility function | Flat stable table surfaces between seats for holding teacups, microphones, notepads and meeting supplies during official receptions | |
| structural stability | Fixed integrated wood frame with low center of gravity to prevent tipping during normal use | |
| armrest utility support | Wide flat wooden armrest tops with 120mm surface width for placing small personal items such as mobile phones or notepads during meetings | |
| layout arrangement flexibility | Individual standalone units can be arranged in linear rows, circular layouts, or paired configurations with matching side tables positioned between seats | |
| floor protection function | Anti-slip silent felt pads under all base contact points to prevent 90% of surface scratches on wood/stone floors and eliminate movement noise during adjustment | |
| matching side table utility | Flat stable table surfaces with 50kg static load capacity for holding teacups, microphones, meeting materials, and name cards during official receptions | |
| Recline Angle / Lock Reference | 125° with 3 suggested lock positions |
Verified carton / gross weight / assembly / loading data
| number of packages per single armchair | 1 piece per carton | |
|---|---|---|
| single chair carton dimensions | 950 x 900 x 700 mm | |
| single chair packaged gross weight | 55 kg | |
| single chair package volume | 0.60 CBM | |
| matching side table carton dimensions | 650 x 450 x 450 mm | |
| matching side table packaged gross weight | 12 kg | |
| assembly time per chair (if delivered knockdown) | 20 minutes | |
| 20ft GP container loading quantity (chairs only) | 88 units | |
| 40ft HQ container loading quantity (chairs only) | 216 units | |
| Reference Package Count | 1 set / 2 cartons |
Recommended spaces / users / usage modes
| government and corporate VIP reception rooms | Formal traditional styling matches official meeting space decor, provides dignified comfortable seating for visiting guests | |
|---|---|---|
| executive boardroom antechambers | Quiet formal appearance suitable for pre-meeting waiting and short conversations between senior staff and guests | |
| high-end hotel executive lounges | Neutral cream and dark wood finish coordinates with luxury hotel interior design, durable construction withstands high guest traffic | |
| private club meeting spaces | Traditional cultural design elements complement classic club decor, modular arrangement allows flexible layout for small or large groups | |
| diplomatic meeting facilities | Dignified uniform appearance supports formal protocol requirements for receiving official delegations | |
| institutional guest reception areas | Durable commercial-grade construction withstands frequent daily use in public institutional spaces | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| office furniture structural safety recommendation | EN 16139:2013 Furniture - Strength, durability and safety - Requirements for non-domestic seating | |
|---|---|---|
| furniture formaldehyde emission recommendation | EN 13986:2004+A1:2015 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking | |
| upholstered furniture flammability recommendation | EN 1021:2014 Upholstered furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette | |
| non-domestic seating strength safety recommendation | EN 16139:2013 Furniture - Strength, durability and safety - Requirements for non-domestic seating | |
| wood-based panel formaldehyde emission recommendation | EN 13986:2004+A1:2015 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking | |
| upholstered furniture ignitability recommendation | EN 1021:2014 Upholstered furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| furniture structural safety recommendation | GB/T 3324 General technical requirements for wooden furniture | |
|---|---|---|
| upholstered furniture safety recommendation | GB 18584 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | |
| upholstered furniture flammability recommendation | GB/T 17927 Upholstered furniture - Assessment of the resistance to ignition of upholstered furniture | |
| furniture durability recommendation | GB/T 35607 Furniture for public places - Technical requirements for seating | |
| wooden furniture general technical recommendation | GB/T 3324 General technical requirements for wooden furniture | |
| wood-based furniture harmful substance limit recommendation | GB 18584 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture |
This product must meet the following technical requirements: 1. furniture structural safety recommendation: GB/T 3324 General technical requirements for wooden furniture; 2. upholstered furniture safety recommendation: GB 18584 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture; 3. upholstered furniture flammability recommendation: GB/T 17927 Upholstered furniture - Assessment of the resistance to ignition of upholstered furniture; 4. furniture durability recommendation: GB/T 35607 Furniture for public places - Technical requirements for seating; 5. wooden furniture general technical recommendation: GB/T 3324 General technical requirements for wooden furniture; 6. wood-based furniture harmful substance limit recommendation: GB 18584 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
