纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2600 × 850 × 900 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Single chair net weight	42 kg
Single chair rated static seat load	160 kg
Tabletop rated static load	30 kg
Seating capacity	2 users
Seat foam density	45 kg/m3
Back foam density	35 kg/m3
Foam rebound performance	40%
Recommended daily occupancy duration	8 hours
Service-life target	8 years
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat upholstery	White fabric or leather-look upholstery over padded cushion, with subtle embossed surface pattern
Back upholstery	White padded back cover in the same visible upholstery family, with horizontal seam division and embossed detailing
Arm cap	Dark-red smooth wood or wood-veneer panel with a clear coated surface, mounted over a white upholstered arm body
Structural frame	Dark-red finished wood or engineered-wood rails forming the rectangular side, front, and lower perimeter frames
Side panel infill	White upholstered or coated panel enclosed within the dark-red wood frame
Seat cushion core	Polyurethane foam core with fabric or leather-look cover and 160 mm target thickness
Back cushion core	Layered polyurethane padding with 160 mm target total thickness and horizontal lumbar pad
Table top	Dark-red wood or wood-veneer square tabletop with a smooth sealed finish
Table frame	Four dark-red wood legs connected by shaped aprons and decorative curved stretchers
Foot blocks	Dark-red rectangular wood or board support blocks, two per chair, elevating the low base
Fasteners and joining hardware	Concealed wood screws, dowels, brackets, or mortise-style connectors targeted for frame assembly
Protective floor glides	Polymer or felt glide pads recommended on each foot block to protect hard floors

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating function	Each chair provides one independent upright seat with high lumbar and shoulder support for formal guest reception.
Back support	The high segmented backrest combines a 620 mm tall cushion and lower lumbar pad for upright sitting.
Arm support	The broad 220 mm arm caps provide a flat resting surface and visually frame the upholstered seat.
Tea service function	The centered 550 mm square table supports one teapot, two cups, documents, or small reception items.
Arrangement pattern	Two facing-position chairs separated by one table create a compact two-person guest conversation layout.
Low-base stability	The continuous wood-trimmed base and two foot blocks per chair provide a non-swiveling, stationary seating structure.
Cushion retention	The seat cushion is enclosed by a raised wood-trimmed front frame to limit forward and lateral movement.
Table access	The open four-leg apron allows leg and cleaning access from either side without drawers or doors.
Maintenance access	Removable or lift-out seat and back cushions should be specified for fabric cleaning and foam replacement.
Floor protection	Glide pads should allow repositioning on wood, tile, or carpet while preventing exposed wood contact with flooring.
Chair base block height	60 mm
Recline Angle / Lock Reference	125° with 3suggested lock positions

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive reception room	The two-chair table layout supports short meetings, courtesy visits, and senior-management guest reception.
Office waiting area	The high-back formal design provides upright, presentable seating for visitors waiting near reception desks.
VIP lounge	The white upholstery and dark-red wood trim suit government, institutional, or corporate hospitality lounges.
Meeting annex	The compact 2.6 m displayed footprint fits beside a larger conference room for breakout conversations.
Tea service setting	The square side table accommodates a teapot, two cups, and small documents during hosted visits.
Quiet consultation space	The separated single seats provide individual personal space for two-person advisory or HR discussions.
Recommended indoor climate	Use in dry, conditioned interiors at 40 to 65 percent relative humidity to protect wood finish and upholstery.
Recommended floor surface	Suitable for wood, tile, marble, or low-pile carpet when fitted with non-marking floor glides.

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

该市场暂无标准数据。

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.4

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

该市场暂无标准数据。

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. 技术标准与检测报告由供应商在投标或采购确认阶段提供；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · RC-SOLO-2W-ST01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · RC-SOLO-2W-ST01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · RC-SOLO-2W-ST01打开导出工具

页面快速操作

发布采购询价

产品描述

The White Upholstered Reception Armchair Set with Dark Wood Frame and Side Table presents a formal two-person seating arrangement suited to professional hospitality. Its layout places two high-back single chairs in facing positions, with the matching square side table centered between them. This creates a compact conversation setting while preserving separate seating space for each user. White upholstery forms the main seating and back surfaces, contrasted by dark-red finished wood or wood-composite framing, arms, trim, and table components. The overall appearance is structured, upright, and tailored for reception environments. Each chair uses dark-red finished wood or engineered-wood rails to create rectangular side, front, and lower perimeter frames, with white upholstered or coated panel infills. The arm caps are smooth dark-red wood or wood-veneer panels with a clear coated surface, set over white upholstered arm bodies. The broad caps provide a flat resting surface and visually frame the seat. A continuous wood-trimmed base, two foot blocks per chair, and a stationary non-swiveling structure support a stable seating posture. The raised wood-trimmed front frame also helps retain the seat cushion and limit forward or lateral movement. Comfort is built around padded, upright support. The finished seat cushion is 90 mm thick and uses polyurethane foam with a density of 45 kg/m3, while the backrest padding is 70 mm thick with foam density of 35 kg/m3 and a stated rebound performance of 40 percent. The high segmented backrest includes a lower lumbar pad and a defined lumbar support zone, combining back and shoulder support for formal guest reception. The clear width between armrests is 540 mm. Upholstery is offered in the product description as white fabric or leather-look material with a subtle embossed surface pattern, and the back cover uses horizontal seam division with matching embossed detailing. The matching side table has a smooth, sealed dark-red wood or wood-veneer square tabletop and four wood legs connected by shaped aprons and decorative curved stretchers. It is intended for a teapot, two cups, documents, or small reception items, with a tabletop rated static load of 30 kg. Each chair has a net weight of 42 kg and a rated static seat load of 160 kg, giving the set a capacity for two users. This set is appropriate for executive reception rooms, office waiting areas, VIP lounges, meeting annexes, hosted tea-service settings, and quiet consultation spaces. It works particularly well where short meetings, courtesy visits, advisory discussions, or visitor waiting require a presentable, non-casual seating arrangement. The displayed footprint fits beside a larger conference room for breakout conversation, while the separated single seats help maintain individual personal space. Procurement planning should account for an unbranded reception seating set, model RC-SOLO-2W-ST01, supplied as one set across two cartons. The reference assembly time is 40 minutes per set. Packaging details list carton dimensions of 850 by 420 by 720 mm, packaged gross weight of 23 kg per set, and carton volume of 0.26 cubic meter per set.

White Upholstered Reception Armchair Set with Dark Wood Frame and Side Table Specifications

供应商与现货