Two-Piece Dark Grey Faux Leather Office Reception Sofa Set with Dark Wood Trim, Removable Lace Headrest and Armrest Covers (model OFS-2S-3S-DGW-001) is listed under Lobby Reception Sofa. Dimensions: 2080 × 880 × 900 mm. Materials: 1.0mm thick dark grey PVC faux leather. Load capacity: 150 kg. Product Features: Stationary,fixed-base,sofa,set,(2-seater,+,3-seater),upholstered,design,Dark,grey,finish. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | KAIERTE | Model | OFS-2S-3S-DGW-001 |
| Overall dimensions (W × D × H) | 2080 × 880 × 900 mm | Seat height (floor to top of seat cushion) | 420 mm |
| Seat depth (front edge to front of back cushion) | 580 mm | Seat cushion thickness | 120 mm |
| Backrest total height (seat surface to top of backrest) | 480 mm | Armrest height (floor to top of armrest) | 620 mm |
| Armrest width (outer edge to seat side) | 180 mm | Wood trim base plinth height (floor to bottom of upholstered seat) | 120 mm |
| Per-seat usable width (between armrests for 3-seater) | 1720 mm | Floor clearance under base plinth | 10 mm |
| Per-seat usable width (between armrests for 2-seater) | 610 mm | Back Cushion Thickness | 160 mm |
| Leg Height / Floor Clearance | 160 mm | Product net weight (complete two-piece set) | 125 kg |
| Static load capacity per seat position | 150 kg | Seat foam density (seat cushion) | 38 kg/m³ |
| Backrest foam density | 28 kg/m³ | Foam rebound rate (cushion core) | 42% |
| Recommended total user capacity for full set | 5 adults | Seat surface abrasion resistance (faux leather) | 50000 cycles (Martindale) |
| Structural frame service life (daily commercial use) | 8 years | Removable lace cover wash durability | 30 wash cycles |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | Main upholstery covering | 1.0mm thick dark grey PVC faux leather |
| Decorative trim and base frame | Dark walnut-stained solid pine wood framing | Internal structural frame | 30mm thick solid pine + plywood jointed frame, corner-block reinforced |
| Seat cushion core | High-density polyurethane foam, 120mm total thickness, 38kg/m³ density, no sag springs | Back cushion core | Medium-density polyurethane foam, 100mm total thickness, 28kg/m³ density, segmented two-section design |
| Decorative removable covers | White floral lace polyester fabric, scalloped edge finish, fitted for armrests and upper backrest | Wood surface finish | Matte PU wood lacquer, wear-resistant coating for dark wood trim |
| Frame joining hardware | Zinc-plated steel screws, corner wooden dowel reinforcements, metal corner brackets at base joints | Bottom dust cover | Black non-woven polypropylene fabric, stapled to base frame underside |
| Upholstery seam construction | Locked stitching with 8 stitches per 30mm seam pitch, matching dark grey thread for seamless finish | Base foot pads | 10mm thick black non-slip plastic foot glides under base plinth |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | Seating function | Fixed-position stationary reception seating, no recline, no swivel, no tilt mechanism, optimized for upright formal visitor seating |
| Decorative cover function | 3 removable lace covers per sofa unit (1 triangular back headrest cover, 2 rectangular armrest covers), machine washable to protect main upholstery from wear and staining | Wood trim function | Perimeter dark wood frame forms a raised protective bumper around upholstered panels, preventing edge scuff damage from luggage or visitor contact |
| Cushion support function | Fixed attached seat and back cushions (non-removable main upholstery), high-resilience foam core maintains shape without indentation after 8 hours of continuous daily use | Floor protection function | Low-profile integrated wood base with plastic glides, distributes weight evenly without requiring separate adjustable feet, suitable for tile, wood, or low-pile carpet office flooring |
| Set configuration function | Matching 2-seater and 3-seater units share identical height, depth, trim, and upholstery finish, designed to be placed adjacent or separated to fit different reception room layouts | Structural stability function | Low center of gravity from wide solid wood base, no rocking or tipping risk when users sit on front edge of seat per commercial furniture stability standards |
| Maintenance function | Smooth faux leather surface can be wiped clean with mild detergent and damp cloth, resisting common office stains from coffee, ink, and dust without discoloration | Cushion Service Configuration | Recommended 2 removable/replaceable cushion methods |
| Number of shipping packages per full set | 2 packages | Shipping carton dimensions (3-seater unit) | 2150 x 950 x 950 mm |
| Shipping carton dimensions (2-seater unit) | 1650 x 950 x 950 mm | Total shipping gross weight (full set, packaging included) | 145 kg |
| Total shipping volume (CBM, full set) | 3.43 CBM | Required on-site assembly time | 15 minutes |
| Standard 40ft HQ container loading capacity (full sets) | 22 sets | Inner packaging material | 5mm thick EPE foam wrap, 25mm thick EPS corner protectors, plastic moisture barrier bag, procurement engineering , not supplier-measured data |
| Outer packaging material | 5-ply corrugated shipping carton with printed handling markings, procurement engineering , not supplier-measured data | Reference Package Count | 1 set / 2 cartons |
| Corporate office reception areas and visitor waiting rooms | Formal dark grey and wood trim design projects a professional business appearance, sized to accommodate multiple waiting visitors without appearing bulky | Executive office lounge and meeting break-out zones | Matching 2+3 seater configuration can be arranged in front of executive desks or in meeting breakout spaces for informal discussions and guest seating |
| Public institution and government office waiting areas | Durable commercial-grade construction and stain-resistant easy-clean surface suits high-traffic public waiting areas with frequent visitor turnover | Small business lobby and bank branch customer waiting spaces | Compact footprint and formal aesthetic works for small lobby spaces, with durable upholstery that withstands daily high-frequency use |
| Recommended pairing furniture | Pair with matching dark wood finish coffee tables (1200x600mm height 450mm) placed between sofa units to create a complete coordinated reception seating area | Floor type suitability | Suitable for installation on ceramic tile, polished concrete, engineered wood, and low-pile commercial carpet flooring without risk of floor damage from integrated base glides |
| User suitability | Designed for adult users in commercial environments, with seat height and depth optimized for 185 cm height range for comfortable seated posture during 60 minute waiting periods | — | — |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2080 × 880 × 900 mm | |
|---|---|---|
| Seat height (floor to top of seat cushion) | 420 mm | |
| Seat depth (front edge to front of back cushion) | 580 mm | |
| Seat cushion thickness | 120 mm | |
| Backrest total height (seat surface to top of backrest) | 480 mm | |
| Armrest height (floor to top of armrest) | 620 mm | |
| Armrest width (outer edge to seat side) | 180 mm | |
| Wood trim base plinth height (floor to bottom of upholstered seat) | 120 mm | |
| Per-seat usable width (between armrests for 3-seater) | 1720 mm | |
| Floor clearance under base plinth | 10 mm | |
| Per-seat usable width (between armrests for 2-seater) | 610 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Product net weight (complete two-piece set) | 125 kg | |
|---|---|---|
| Static load capacity per seat position | 150 kg | |
| Seat foam density (seat cushion) | 38 kg/m³ | |
| Backrest foam density | 28 kg/m³ | |
| Foam rebound rate (cushion core) | 42% | |
| Recommended total user capacity for full set | 5 adults | |
| Seat surface abrasion resistance (faux leather) | 50000 cycles (Martindale) | |
| Structural frame service life (daily commercial use) | 8 years | |
| Removable lace cover wash durability | 30 wash cycles | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Main upholstery covering | 1.0mm thick dark grey PVC faux leather | |
|---|---|---|
| Decorative trim and base frame | Dark walnut-stained solid pine wood framing | |
| Internal structural frame | 30mm thick solid pine + plywood jointed frame, corner-block reinforced | |
| Seat cushion core | High-density polyurethane foam, 120mm total thickness, 38kg/m³ density, no sag springs | |
| Back cushion core | Medium-density polyurethane foam, 100mm total thickness, 28kg/m³ density, segmented two-section design | |
| Decorative removable covers | White floral lace polyester fabric, scalloped edge finish, fitted for armrests and upper backrest | |
| Wood surface finish | Matte PU wood lacquer, wear-resistant coating for dark wood trim | |
| Frame joining hardware | Zinc-plated steel screws, corner wooden dowel reinforcements, metal corner brackets at base joints | |
| Bottom dust cover | Black non-woven polypropylene fabric, stapled to base frame underside | |
| Upholstery seam construction | Locked stitching with 8 stitches per 30mm seam pitch, matching dark grey thread for seamless finish | |
| Base foot pads | 10mm thick black non-slip plastic foot glides under base plinth | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating function | Fixed-position stationary reception seating, no recline, no swivel, no tilt mechanism, optimized for upright formal visitor seating | |
|---|---|---|
| Decorative cover function | 3 removable lace covers per sofa unit (1 triangular back headrest cover, 2 rectangular armrest covers), machine washable to protect main upholstery from wear and staining | |
| Wood trim function | Perimeter dark wood frame forms a raised protective bumper around upholstered panels, preventing edge scuff damage from luggage or visitor contact | |
| Cushion support function | Fixed attached seat and back cushions (non-removable main upholstery), high-resilience foam core maintains shape without indentation after 8 hours of continuous daily use | |
| Floor protection function | Low-profile integrated wood base with plastic glides, distributes weight evenly without requiring separate adjustable feet, suitable for tile, wood, or low-pile carpet office flooring | |
| Set configuration function | Matching 2-seater and 3-seater units share identical height, depth, trim, and upholstery finish, designed to be placed adjacent or separated to fit different reception room layouts | |
| Structural stability function | Low center of gravity from wide solid wood base, no rocking or tipping risk when users sit on front edge of seat per commercial furniture stability standards | |
| Maintenance function | Smooth faux leather surface can be wiped clean with mild detergent and damp cloth, resisting common office stains from coffee, ink, and dust without discoloration | |
| Cushion Service Configuration | Recommended 2 removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Number of shipping packages per full set | 2 packages | |
|---|---|---|
| Shipping carton dimensions (3-seater unit) | 2150 x 950 x 950 mm | |
| Shipping carton dimensions (2-seater unit) | 1650 x 950 x 950 mm | |
| Total shipping gross weight (full set, packaging included) | 145 kg | |
| Total shipping volume (CBM, full set) | 3.43 CBM | |
| Required on-site assembly time | 15 minutes | |
| Standard 40ft HQ container loading capacity (full sets) | 22 sets | |
| Inner packaging material | 5mm thick EPE foam wrap, 25mm thick EPS corner protectors, plastic moisture barrier bag, procurement engineering , not supplier-measured data | |
| Outer packaging material | 5-ply corrugated shipping carton with printed handling markings, procurement engineering , not supplier-measured data | |
| Reference Package Count | 1 set / 2 cartons |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Corporate office reception areas and visitor waiting rooms | Formal dark grey and wood trim design projects a professional business appearance, sized to accommodate multiple waiting visitors without appearing bulky | |
|---|---|---|
| Executive office lounge and meeting break-out zones | Matching 2+3 seater configuration can be arranged in front of executive desks or in meeting breakout spaces for informal discussions and guest seating | |
| Public institution and government office waiting areas | Durable commercial-grade construction and stain-resistant easy-clean surface suits high-traffic public waiting areas with frequent visitor turnover | |
| Small business lobby and bank branch customer waiting spaces | Compact footprint and formal aesthetic works for small lobby spaces, with durable upholstery that withstands daily high-frequency use | |
| Recommended pairing furniture | Pair with matching dark wood finish coffee tables (1200x600mm height 450mm) placed between sofa units to create a complete coordinated reception seating area | |
| Floor type suitability | Suitable for installation on ceramic tile, polished concrete, engineered wood, and low-pile commercial carpet flooring without risk of floor damage from integrated base glides | |
| User suitability | Designed for adult users in commercial environments, with seat height and depth optimized for 185 cm height range for comfortable seated posture during 60 minute waiting periods |
EU Market Access Requirements* EN Standards
| EN 12520:2015 (Furniture - Strength, durability and safety - Requirements for domestic seating) | Applicable European standard for seating strength, durability, and safety performance, recommended for export or international project procurement specifications | |
|---|---|---|
| EN 1021-1:2014 (Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette) | Applicable European fire safety standard for upholstered furniture ignition resistance, recommended for high-occupancy public reception areas |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB 18584-2001 (Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture) | Applicable Chinese national standard for formaldehyde and heavy metal emission limits for wood trim components, recommended as acceptance criteria for indoor office use | |
|---|---|---|
| GB 20400-2006 (Leather and fur - Limit of harmful matter) | Applicable Chinese national standard for harmful substance limits in the faux leather upholstery, recommended for indoor air quality compliance in public office spaces |
This product must meet the following technical requirements: 1. GB 18584-2001 (Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture): Applicable Chinese national standard for formaldehyde and heavy metal emission limits for wood trim components, recommended as acceptance criteria for indoor office use; 2. GB 20400-2006 (Leather and fur - Limit of harmful matter): Applicable Chinese national standard for harmful substance limits in the faux leather upholstery, recommended for indoor air quality compliance in public office spaces; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp