Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	2400 × 950 × 900 mm
Seat height from floor	450 mm
Seat depth per seating position	600 mm
Backrest height above seat	450 mm
Armrest height above floor	620 mm
Armrest width	180 mm
Seat cushion thickness	150 mm
Backrest cushion thickness	120 mm
Decorative throw pillow dimensions	450 x 450 mm
Wood trim width	50 mm
Floor clearance under sofa base	20 mm
Back Cushion Thickness	160 mm
Leg Height / Floor Clearance	160 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

3-seater sofa net weight	145 kg
Per-seat static load capacity	160 kg
Total seating capacity for full set	5 seats
Foam density (seat cushions)	45 kg/m³
Foam density (backrests)	35 kg/m³
Seam stitch pitch	8 stitches per 30mm
Recommended surface abrasion resistance (upholstery)	50000 Martindale cycles
Structural frame service life	10 years
Total occupant capacity for full set	4 seats
Seat cushion foam density	45 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

External upholstery	Cream top-grain leather match (genuine leather on contact surfaces, matching PU on side/back panels)
Accent trim	Polished solid walnut-toned hardwood
Internal frame	40mm thick kiln-dried hardwood with reinforced corner blocking
Seat support system	8mm thick sinuous steel springs with polypropylene webbing layer
Cushion filling	High resilience polyurethane foam with 20mm down wrap top layer
Throw pillows	Stitched leather match covers with polyfiber fill
Base plinth feet	Matching solid wood low-profile feet
Upholstery surface finish	Light protective matte topcoat
Frame joint hardware	Zinc-plated steel screws and corner brackets
Contact surface upholstery	Cream top-grain leather match with 1.2mm thickness, with matching PU on non-contact side and back panels
Accent trim components	Polished walnut-toned solid hardwood with clear matte lacquer finish
Internal load-bearing frame	40mm thick kiln-dried hardwood with double dowel reinforced corner blocking

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating configuration	Fixed 3-piece modular arrangement: 1 three-seat sofa + 2 matching single armchairs
Cushion design	Fixed semi-attached seat and back cushions
Posture support	Upright ergonomic back angle of 105 degrees from seat
Armrest function	Fully padded wide armrests with solid wood edge trim
Decor elements	Included matching stitched throw pillows: 2 brown per 3-seater, 1 cream center pillow on 3-seater, 1 brown per single chair
Base design	Low-profile enclosed plinth base with solid wood perimeter trim
Upholstery performance	Stain-resistant treated upholstery surface
Set layout compatibility	Symmetric arrangement suitable for centered placement facing reception points or entryways
Set configuration	Fixed 3-piece arrangement: 1 two-seat central sofa + 2 matching single armchairs
Cushion attachment	Semi-attached seat and back cushions secured with hidden hook-and-loop fasteners
Backrest posture angle	Fixed 105 degree angle from seat surface
Armrest construction	Fully padded wide armrests with solid wood impact-resistant edge trim

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Total packaged units per set	5 packages
Largest carton dimensions (3-seater frame)	2450 x 980 x 650 mm
Single chair carton dimensions	1250 x 980 x 650 mm
Total gross weight per full set	330 kg
Total CBM per full set	4.8 m³
On-site assembly time	60 minutes
40HQ container loading capacity	28 sets
Interior packaging protection	50mm thick EPE foam wrap, corner hardboard protectors, plastic moisture barrier, double-wall corrugated cardboard
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Hotel lobbies and reception halls	Formal symmetric design with premium wood and cream upholstery creates a professional welcoming first impression for upscale hotel properties
Corporate executive reception areas	Conservative executive styling matches premium office environments for greeting clients and visiting executives
Government and institutional waiting areas	Durable commercial construction and formal aesthetic meets requirements for public sector formal reception spaces
VIP lounge spaces	Thick cushioning and wide armrests provide comfortable waiting for VIP guests in airport, club or premium service facilities
High-end residential formal living rooms	Balanced 1+2+1 layout suits large formal living spaces in luxury villas or upscale residential developments
Recommended companion furniture	Pair with matching marble or wood coffee tables of 700mm height, centered between seating units to complete the reception layout
Upscale hotel lobbies and reception halls	Formal symmetric design with wood and cream upholstery creates a professional first impression for high-end hotel properties, scaled for large high-ceiling lobby spaces
Government and institutional formal waiting areas	Durable commercial construction and understated aesthetic meets public sector formal reception requirements, with stain-resistant materials suitable for continuous daily use

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12520:2015	Furniture - strength, durability and safety - requirements for domestic seating, applicable performance baseline for non-domestic reception adaptation
EN 1021-1:2014	Furniture - assessment of ignitability of upholstered furniture - ignition source smouldering cigarette, minimum fire safety requirement for public space furniture
EN 1021-2:2014	Furniture - assessment of ignitability of upholstered furniture - ignition source match flame equivalent, minimum fire safety for commercial lobby installations

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

North America procurement and testing reference	ANSI/BIFMA X5.4 Public and Lounge Seating

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to the wood frame and solid wood trim components of this sofa set
GB 18584-2001	Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture, required formaldehyde emission limit <0.124mg/m³ for indoor public space use
GB/T 1952.1-2012	Soft furniture - sofa, applicable structural safety, durability and performance testing standard for upholstered seating products
GB 20400-2006	Leather and fur - limit of harmful matter, applicable to leather upholstery components for public indoor environments

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to the wood frame and solid wood trim components of this sofa set;
2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances of wood based furniture, required formaldehyde emission limit <0.124mg/m³ for indoor public space use;
3. GB/T 1952.1-2012: Soft furniture - sofa, applicable structural safety, durability and performance testing standard for upholstered seating products;
4. GB 20400-2006: Leather and fur - limit of harmful matter, applicable to leather upholstery components for public indoor environments;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · SOF-RCP-2310-3PC

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · SOF-RCP-2310-3PC

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · SOF-RCP-2310-3PCOpen Export Tool

Quick Actions

Post an RFQ

Product Description

This executive reception sofa set presents a polished, formal three-piece configuration built around a central sofa flanked by two matching single armchairs, arranged in a symmetric 1+2+1 layout designed for balanced, welcoming presentation. Soft cream upholstery is framed by polished walnut-toned solid wood trim that traces arm edges, base perimeters and geometric corner details, finished with a clear matte lacquer for refined depth. Wide, fully padded armrests sit at a comfortable resting height, trimmed with the same solid wood to resist scuff damage from bags and frequent contact. Low-profile enclosed plinth bases create a streamlined, leg-free silhouette, while coordinated stitched square throw pillows in complementary cream and brown tones are positioned for consistent, tailored visual appeal across all units. Each seating piece is built on a kiln-dried hardwood internal frame with reinforced corner blocking and zinc-plated steel hardware, supported by sinuous steel springs and polypropylene webbing for stable, even cushion performance. Upholstery uses cream leather match, with genuine leather on user contact surfaces and coordinating PU on non-contact side and back panels, treated with a light protective matte topcoat for stain resistance and easy routine cleaning. High-resilience polyurethane foam fills both seat and back cushions, with seat foam formulated to retain shape through repeated use, and back foam calibrated for medium-firm supportive comfort. Semi-attached cushions secured with hidden fasteners prevent shifting while preserving a clean, custom fit. The fixed 105-degree backrest angle supports upright, comfortable posture appropriate for short waiting periods and guest interactions. This set is well suited for upscale hotel lobbies, corporate executive reception areas, formal government and institutional waiting spaces, premium VIP lounges, and high-end residential formal living rooms, with a neutral palette that coordinates seamlessly with marble, stone and wood interior finishes. It pairs naturally with matching marble or solid wood coffee tables centered between seating units to complete a cohesive reception layout. For procurement, teams should confirm final bill of materials details including exact upholstery composition and foam density with suppliers prior to order placement. Shipping and assembly planning should account for multi-package delivery, with standard protective packaging to safeguard upholstered surfaces and wood trim during transit; on-site setup requires only foot attachment, cushion placement and unit alignment, with no complex frame construction required. Loading plans for bulk orders can be calculated against standard 40-foot high cube container capacities for efficient project fulfillment.

1+2+1 Cream Leather Match Wood Trim Executive Reception Sofa Set Specifications

Suppliers and stock