| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Three-seat sofa overall dimensions | 1900 x 850 x 900 mm | |
|---|---|---|
| Single armchair overall dimensions | 900 x 850 x 900 mm | |
| Seat height from floor | 450 mm | |
| Seat depth (three-seat sofa, per position) | 550 mm | |
| Seat depth (single armchair) | 550 mm | |
| Backrest height above seat | 450 mm | |
| Armrest height from floor | 620 mm | |
| Armrest width | 120 mm | |
| Clearance under sofa base | 30 mm | |
| Wood accent trim dimensions | 80 x 50 mm cross-section | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Total set weight | 165 kg | |
|---|---|---|
| Seat static load capacity per position | 150 kg | |
| Recommended total seating capacity | 5 people | |
| Cushion compression set rating | 10% after 50,000 cycle tests | |
| Upholstery abrasion resistance | 50000 double rubs | |
| Standard commercial warranty | 3 years | |
| Maximum rated seating occupancy | 5 people | |
| Cushion compression set performance | 10% after 50000 cyclic load tests | |
| Seam strength rating | 600 N tensile strength | |
| Frame fatigue resistance | 100000 simulated seating cycles without structural failure |
Core acceptance fields · Panels / hardware / frame / upholstery
| Outer upholstery | Cream matte faux leather (PU) | |
|---|---|---|
| Seat cushion core | 40 kg/m³ density high-resilience polyurethane foam | |
| Back cushion core | 30 kg/m³ density soft polyurethane foam | |
| Seat cushion thickness | 120 mm | |
| Back cushion thickness | 100 mm | |
| Arm accent trim | Dark walnut-stained solid hardwood | |
| Inner load-bearing frame | 30 mm x 50 mm kiln-dried solid hardwood | |
| Lower base trim | Black hard PVC edge banding | |
| Upholstery stitching | Polyester bonded thread with 8 stitches per inch | |
| Frame joint reinforcement | Metal corner brackets at all seat and back joints | |
| Contact surface upholstery | Cream matte PU faux leather, 0.8 mm thickness | |
| Seat cushion core material | 40 kg/m³ density high-resilience polyurethane foam, 120 mm thickness |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Fixed stationary three-piece set, no recline or swivel mechanisms | |
|---|---|---|
| Cushion design | Tight attached seat and back cushions | |
| Arm support design | Rolled curved arms with wood structural accents | |
| Back support feature | Contoured lumbar support integrated into back cushion | |
| Floor protection | Integrated black non-marking base trim | |
| Layout flexibility | Individual standalone units allow flexible arrangement | |
| Cleaning accessibility | 30 mm base clearance allows standard vacuum and mop access under units | |
| Base seating configuration | Fixed stationary 3-piece set with no recline, swivel or rocking mechanisms | |
| Cushion attachment design | Tight, permanently attached seat and back cushions | |
| Armrest structural design | Fully padded rolled curved arms with exposed wood accent trim at front vertical supports | |
| Floor contact protection | Integrated black non-marking PVC base strip along full bottom perimeter | |
| Layout arrangement flexibility | 3 standalone units allow linear, conversational or L-shaped arrangement |
Verified carton / gross weight / assembly / loading data
| Number of shipping packages | 3 units | |
|---|---|---|
| Three-seat sofa shipping carton dimensions | 1950 x 900 x 750 mm | |
| Single armchair shipping carton dimensions (per unit) | 950 x 900 x 750 mm | |
| Total shipping gross weight | 195 kg | |
| Total shipping volume | 2.6 CBM | |
| On-site assembly time | 20 minutes | |
| 40ft HQ container loading quantity | 52 sets | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm |
Recommended spaces / users / usage modes
| Corporate office reception areas | Formal styling and durable upholstery suitable for front-of-house guest waiting areas in professional office environments | |
|---|---|---|
| Government and institutional meeting spaces | Conservative cream and wood-trim design appropriate for official meeting rooms, visitor waiting rooms, and public service offices | |
| Small business lobby areas | Compact three-piece configuration fits lobbies of 15 sqm or larger, providing dedicated guest seating without excessive space use | |
| Executive office visitor seating | Matching formal styling complements traditional executive desks, suitable for placing opposite executive desks for guest meetings | |
| Hotel and hospitality waiting zones | Stain-resistant faux leather upholstery is suitable for low-to-medium traffic hotel business centers and lounge waiting areas | |
| Medical and clinic waiting areas | Smooth non-porous upholstery allows easy disinfection, suitable for private clinic or administrative hospital waiting spaces | |
| Corporate office front reception areas | Formal neutral styling and durable upholstery are suitable for front-of-house guest waiting areas in corporate office environments, projecting a professional image for visitors | |
| Government and institutional visitor spaces | Conservative cream and dark wood trim design is appropriate for official meeting room waiting areas, public service lobby spaces, and institutional reception zones |
EU Market Access Requirements* EN Standards
| EN 1335-2:2018 Office furniture - Office work chair - Part 2: Safety requirements | Reference safety standard for structural stability and load requirements applicable to non-task reception seating | |
|---|---|---|
| EN 1021-1:2014 Upholstered furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette | Recommended minimum flame resistance standard for public area upholstered seating | |
| EN 1021-2:2014 Upholstered furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent | Recommended flame resistance standard for commercial office reception furniture | |
| EN 16139:2013 Furniture - Strength, durability and safety - Requirements for non-domestic seating | Reference standard for structural stability, static load and fatigue performance requirements for commercial public area seating |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applicable for wooden frame and wood trim structural strength, dimensional stability, and finish durability requirements | |
|---|---|---|
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | Applicable for formaldehyde emission limits from wood components, required for indoor office use | |
| GB/T 27717-2011 Upholstered furniture for public places | Applicable for flame retardancy, structural strength, and durability requirements for high-traffic public reception seating | |
| GB 20400-2006 Leather and fur - Limit of harmful matter | Applicable for harmful substance limits if genuine leather is used, or PU leather coating compliance for indoor use |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applicable for wooden frame and wood trim structural strength, dimensional stability, and finish durability requirements; 2. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture: Applicable for formaldehyde emission limits from wood components, required for indoor office use; 3. GB/T 27717-2011 Upholstered furniture for public places: Applicable for flame retardancy, structural strength, and durability requirements for high-traffic public reception seating; 4. GB 20400-2006 Leather and fur - Limit of harmful matter: Applicable for harmful substance limits if genuine leather is used, or PU leather coating compliance for indoor use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
