Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1100 × 900 × 900 mm
Overall per-seat dimensions	1100 x 900 x 900 mm
Seat height from floor	450 mm
Seat cushion usable depth	580 mm
Seat cushion usable width (between armrests)	620 mm
Backrest total height (from seat surface)	550 mm
Armrest top height from floor	620 mm
Armrest panel thickness	40 mm
Matching side table dimensions	600 x 600 x 550 mm
Side table lower shelf clearance	350 mm
Floor clearance under sofa base	20 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Per-seat static load capacity	200 kg
Per-seat net weight (reference)	45 kg
Seat cushion foam density	45 kg/m³
Backrest foam density	35 kg/m³
Seam stitching pull strength	100 N
Upholstery abrasion resistance (Martindale)	50000 cycles
Recommended number of users per seat	1 adult per single seat
Recommended usable lifespan for commercial application	8 years
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Upholstery material	1.2mm thick dark brown top-grain match PU leather
Frame and trim material	Polished reddish-brown solid hardwood (rubber wood reference)
Seat cushion padding	45kg/m³ high-resilience polyurethane foam, 120mm thick
Backrest padding	35kg/m³ polyurethane foam, 80mm thick
Inner support frame	30mm thick kiln-dried hardwood frame, corner blocked and screwed
Side table top material	25mm thick solid wood veneer over MDF core, high-gloss polished finish
Side table apron details	20mm thick solid wood with traditional Chinese geometric hollow cutout
Feet material	Solid hardwood block feet, finished to match wood trim, with non-slip felt pads at base
Upholstery stitching details	8 stitches per inch (3.15 stitches per cm) reinforced nylon thread
Inner back support board	12mm thick multi-layer hardwood plywood, covered with 10mm soft polyester batting
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating function	Fixed upright seating position with no recline, tilt or swivel function
Integrated armrest function	Wide solid wood armrests provide stable arm support and impact-resistant surface, preventing damage from bags or items placed on armrests
Modular pairing function	Identical single seats can be arranged in pairs, rows or L-shaped layouts to fit different reception area sizes
Matching side table function	Stable flat table surface for placing teacups, documents, potted plants or visitor personal items, with lower open storage for magazines or small objects
Upholstery maintenance function	Smooth PU leather surface resists liquid spills, can be wiped clean with a damp cloth without staining, suitable for high-traffic public use
Structural stability function	Low center of gravity, wide solid wood base and block feet prevent tipping even when users sit on armrests or shift weight, meeting commercial furniture stability requirements
Floor protection function	Non-slip felt pads on base feet prevent scratches on marble, tile or wood flooring, reduce sliding noise when moving seats for layout adjustment
Seating support function	Fixed upright 105-degree seated position with no recline, tilt or swivel function
Modular layout function	Identical single seats can be arranged in pairs, linear rows or L-shaped layouts to fit reception areas from 6 to 30 square meters
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Number of packages per 2-seat + 1-table set	3 packages total: 2 cartons for single sofas, 1 carton for side table
Per-sofa carton dimensions	1150 x 950 x 950 mm
Per-sofa carton gross weight	52 kg
Side table carton dimensions	650 x 650 x 200 mm
Side table carton gross weight	18 kg
Total CBM per full set (2 chairs + 1 table)	1.17 CBM
On-site assembly time per full set	20 minutes
40HQ container loading quantity (full set basis)	58 sets
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

VIP reception room application	Suitable for executive office VIP reception areas, government and corporate meeting rooms, formal visitor waiting spaces
Lobby waiting area application	Can be arranged in rows or groups for hotel lobbies, bank service halls, hospital administrative waiting areas
Small meeting space application	2 seats with central table configuration creates a private 2-person conversation space for small negotiation, interview or consultation rooms
Recommended matching configuration	Pairs with matching 3-seat sofa, additional side tables and wood-finish coffee table to create complete reception area sets
Flooring compatibility	Suitable for installation on marble, polished tile, engineered wood and carpeted commercial flooring
Target user profile	Designed for adult users in formal commercial and institutional settings, supporting professional posture during meetings and waiting periods
Maintenance requirement note	Recommended for indoor climate-controlled environments, avoid prolonged direct sunlight to prevent leather fading and wood finish cracking, suitable for indoor commercial use only
Full set matching configuration	Pairs with matching 3-seat sofa, additional side tables and matching wood-finish coffee table to create complete reception area sets

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

BS EN 1022	2018 Domestic furniture – Seating – Determination of stability

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

North America procurement and testing reference	ANSI/BIFMA X5.4 Public and Lounge Seating

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 1952.1-2012 Upholstered furniture	Sofas

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 1952.1-2012 Upholstered furniture: Sofas;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · REC-SOFA-1SEAT-WDACCENT

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · REC-SOFA-1SEAT-WDACCENT

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · REC-SOFA-1SEAT-WDACCENTOpen Export Tool

Quick Actions

Post an RFQ

Product Description

This unbranded commercial office reception single seating sofa features a cohesive, formal visual profile, pring dark brown matte PU leather upholstery with polished reddish-brown solid hardwood accents across armrests, outer frame trim, and square block feet. The clean, symmetric silhouette includes wide, flat solid wood armrests and a strght, upright backrest, designed for flexible arrangement: identical units can be placed in pairs, linear rows, or L-shaped layouts to adapt to varying space sizes, with a matching side table included to complete the curated look. The sofa is built for high-traffic commercial use, starting with a kiln-dried hardwood inner frame secured with corner blocks and screws for structural rigidity. Seat and backrests are padded with high-resilience polyurethane foam, with a layered rigid plywood support board beneath padding to prevent sagging over time, covered by a 1.2mm thick PU leather surface finished with reinforced nylon stitching at seams. The solid wood components are coated in a high-gloss clear lacquer for moisture and scratch resistance, while the sofa’s block feet are fitted with non-slip felt pads to protect flooring and reduce movement noise. The included matching side table features a solid wood veneer top over an MDF core, with a decorative geometric hollow-cut solid wood apron connected with stable traditional joinery, and a lower open shelf for additional storage. Functional design supports formal waiting and meeting use: the fixed upright seating position encourages professional posture, with dimensions aligned to adult ergonomic needs for full thigh, upper back, and arm support during extended wts. The non-porous PU leather surface resists liquid spills and wipes clean easily with a damp cloth, while the hard, smooth wood armrests resist scuffs from bags or personal items and are simple to mntn. The side table sits aligned to armrest height for convenient access, holding teacups, documents, or small decor items on its top surface, with lower clearance suited for storing reading materials. This set is well suited for a range of professional spaces, including corporate VIP reception rooms, executive meeting areas, hotel lobbies, bank service halls, and hospital administrative waiting zones. It works equally well in small consultation or interview rooms, where two seats paired with the included table create an intimate, professional conversation nook, and is compatible with marble, polished tile, engineered wood, and low-pile carpet flooring. For procurement, note that sofas ship fully assembled, while the side table requires simple leg attachment on site for fast installation. Buyers should confirm exact wood species and material specifications directly with suppliers prior to final order, and plan configurations to align with intended space dimensions. The set is rated for regular commercial reception use, and is intended for indoor climate-controlled environments to preserve material finish over its expected service life.

Dark Brown PU Leather Office Reception Single Sofa with Solid Wood Accents, Matching Side Table Included Specifications

Suppliers and stock