| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 2210 x 1070 x 724 mm | |
|---|---|---|
| Center umbrella hole diameter | 51 mm | |
| Single chair overall dimensions | 680 x 660 x 910 mm | |
| Chair seat height from floor | 450 mm | |
| Chair seat width between armrests | 500 mm | |
| Chair seat cushion thickness | 50 mm | |
| Table edge border width | 100 mm | |
| Chair backrest height above seat | 460 mm | |
| Clear knee space under table apron | 640 mm | |
| Chair leg footprint width | 560 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Total set net weight | 136 kg | |
|---|---|---|
| Table distributed static load capacity | 75 kg | |
| Per-chair static weight capacity | 159 kg | |
| Recommended number of diners | 8 | |
| Frame rust-free service life | 10 years | |
| Outdoor UV fade resistance rating | 500 hours | |
| Cushion water drainage time | 30 minutes | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table and chair frames | 4mm thick cast aluminum with dark bronze powder-coat finish | |
|---|---|---|
| Table central inlay | Geometric parquet ceramic mosaic tile set in weatherproof adhesive | |
| Table outer border | Cast aluminum frame with stone-look tile trim | |
| Chair armrests | Smooth curved cast aluminum integrated with frame | |
| Chair backrests | Open lattice cast aluminum scrollwork panel | |
| Seat cushion fabric | 230g/㎡ all-weather olefin fabric with water-repellent treatment | |
| Cushion inner core | 50mm thick quick-dry polyurethane foam | |
| Foot glides | Hard-wearing nylon non-slip glides on each leg end | |
| Assembly hardware | Stainless steel rust-resistant bolts and connectors | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Table center umbrella hole | Accepts 51mm diameter patio umbrella poles, includes matching cap | |
|---|---|---|
| Seat cushions | Fully removable with tie fasteners for cleaning or seasonal storage | |
| Chair seating position | Fixed non-swivel, non-reclining position optimized for dining use | |
| Surface maintenance | Frames and tabletop wipe clean with damp cloth, cushions spot-clean with mild soap | |
| Frame weather protection | Powder coating resists chipping, rust, and UV damage for year-round outdoor use | |
| Table load distribution | Central cross-brace under tabletop supports even weight distribution across surface | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential outdoor patio or wooden deck use | 8-person seating capacity for family outdoor meals and gatherings | |
|---|---|---|
| Hotel or restaurant outdoor terrace seating | Commercial-grade cast construction withstands frequent public use | |
| Garden or backyard entertainment space | Weather-resistant finish holds up to year-round outdoor exposure | |
| Poolside dining area | Rust-proof aluminum frames resist moisture and pool chemical exposure | |
| Balcony or rooftop dining space (large) | Stable footprint and classic styling fits upscale exterior spaces | |
| Recommended accessory pairing | 51mm diameter patio umbrella for sun shading over the dining surface |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 Outdoor furniture - Seating and tables for camping, domestic and contract use | General safety requirement baseline for outdoor dining furniture performance | |
|---|---|---|
| EN 581-2:2015 Outdoor furniture - Mechanical safety requirements for seating | Applicable for chair static load, stability, and fatigue testing | |
| EN 581-3:2017 Outdoor furniture - Mechanical safety requirements for tables | Applicable for table load capacity, stability, and edge safety testing |
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for furniture: metal furniture | Applicable for frame dimensional stability, structural strength, and finish durability inspection | |
|---|---|---|
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture | Reference applicable for coating lead and heavy metal content limits on frame finishes | |
| GB/T 16422.2-2014 Plastics - Methods of exposure to laboratory light sources | Applicable for UV aging test of cushion fabric and powder coating |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for furniture: metal furniture: Applicable for frame dimensional stability, structural strength, and finish durability inspection; 2. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture: Reference applicable for coating lead and heavy metal content limits on frame finishes; 3. GB/T 16422.2-2014 Plastics - Methods of exposure to laboratory light sources: Applicable for UV aging test of cushion fabric and powder coating; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
