| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 2134 x 1118 x 750 mm | |
|---|---|---|
| Tabletop thickness | 20 mm | |
| Umbrella hole diameter | 57 mm | |
| Center recessed tray compartment dimensions | 610 x 406 x 38 mm | |
| Apron height below tabletop | 127 mm | |
| Leg span lengthwise | 1829 mm | |
| Leg span widthwise | 813 mm | |
| Knee clearance height under apron | 623 mm | |
| Corner radius | 50 mm | |
| Edge trim width | 25 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Net weight | 35 kg | |
|---|---|---|
| Distributed tabletop static load | 136 kg | |
| Center point load capacity | 45 kg | |
| Seating capacity | 6 persons | |
| Powder coating thickness | 80 um | |
| Recommended cover weight capacity | 23 kg | |
| Frame rust resistance lifespan | 5 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop frame and lattice | Sand-cast aluminum alloy | |
|---|---|---|
| Surface finish | Multi-step antique bronze powder coat | |
| Apron assembly | Cast aluminum with scroll openwork | |
| Support legs and base crossbars | Thick-walled cast aluminum tubing | |
| Center recessed tray insert | Black matte food-grade plastic liner | |
| Umbrella hole cap | Matching cast bronze aluminum plug | |
| Assembly fasteners | Stainless steel 8mm hex bolts | |
| Foot pads | Non-marking rubber caps | |
| Surface texture | Hammered embossed cast texture | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Umbrella hole function | Accepts standard patio umbrellas up to 57mm pole diameter | |
|---|---|---|
| Center inset compartment | Functions as ice bucket or serving tray with removable liner | |
| Surface drainage | Open lattice tabletop design allows rainwater to drain freely | |
| Assembly requirement | Knock-down assembly with included hardware and hex key | |
| Weather performance | Withstands full sun, rain and humidity exposure without rusting | |
| Seating access | Uniform 711mm edge clearance per seat position | |
| Leveling capability | Adjustable rubber foot pads compensate for uneven patio surfaces | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Packaging note | Engineering, not supplier-measured data | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential patio application | Suitable for backyard, garden or covered porch dining areas | |
|---|---|---|
| Commercial outdoor use | Applicable for restaurant sidewalk patios and cafe outdoor seating | |
| Climate suitability | Performs well in coastal, rainy and high-humidity environments | |
| Recommended pairing | Pairs with 6 cast aluminum patio armchairs with weatherproof cushions | |
| Surface compatibility | Safe for stone paver, concrete, wood deck and tile patio surfaces | |
| Maintenance requirement | Wipe clean with damp cloth; use fitted cover when not in use | |
| Use function | Supports casual dining, tea service and small outdoor gatherings |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture seating and table safety general requirements reference for procurement | |
|---|---|---|
| EN 581-3:2017 | Outdoor table mechanical safety and structural performance test criteria reference |
Standards applicable to China-market projects
| GB/T 24821-2009 | Outdoor furniture metal table mechanical performance test reference for load and stability |
|---|
This product must meet the following technical requirements: 1. GB/T 24821-2009: Outdoor furniture metal table mechanical performance test reference for load and stability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
