Product supplier5-Piece Cast Aluminum Round Outdoor Patio Dining Set with Umbrella Hole and Tan Cushions, Sand-cast aluminum alloy with antique bronze powder-coat finish
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1220 × 1220 × 760 mm | |
|---|---|---|
| Overall set footprint with chairs arranged | 2440 x 2440 mm | |
| Round table top diameter | 1220 mm | |
| Table dining surface height | 760 mm | |
| Central table umbrella hole diameter | 60 mm | |
| Pedestal table base diameter at floor | 760 mm | |
| Chair seat height with cushion installed | 470 mm | |
| Chair seat usable dimensions (W x D) | 510 x 480 mm | |
| Chair backrest height above seat | 495 mm | |
| Chair armrest height above seat | 200 mm | |
| Seat cushion thickness | 75 mm | |
| Cast aluminum frame wall thickness | 4 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total assembled set net weight | 82 kg | |
|---|---|---|
| Per-chair static weight capacity | 180 kg | |
| Round table top static weight capacity | 91 kg | |
| Cushion foam density | 30 kg/m³ | |
| Cushion foam rebound rate | 60% | |
| Seam stitch pitch for cushion covers | 8 stitches per 30mm | |
| Frame corrosion resistance rating | 1000 hours salt spray exposure | |
| Outdoor fabric UV fade resistance | 500 hours accelerated weathering | |
| Fabric abrasion resistance (Martindale) | 25000 cycles | |
| Reference Static Load | 150 kg depending on category |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Table and chair frames | Sand-cast aluminum alloy with antique bronze powder-coat finish | |
|---|---|---|
| Table top surface | Cast aluminum with embossed decorative medallion pattern, textured non-slip finish | |
| Table pedestal base | Two-tier cast aluminum construction with open scroll filigree, wide circular floor flange | |
| Chair legs and feet | Cast aluminum splayed curved legs with scrolled decorative feet, integrated non-slip rubber foot pads | |
| Chair backrests | Cast aluminum openwork lattice with decorative scroll insets, solid curved top rail | |
| Chair armrests | Cast aluminum curved scroll arms with decorative curled ends, integrated into frame | |
| Seat cushion cores | Quick-dry reticulated polyurethane foam | |
| Seat cushion covers | Solution-dyed polyester outdoor fabric in tan/sesame color, removable with zipper closures | |
| Frame surface coating | UV-stabilized polyester powder coat in antique bronze with hand-brushed highlight detailing | |
| Umbrella hole fitting | Injection-molded plastic insert with removable cap, sized for standard umbrella poles | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Umbrella accommodation | Central table hole supports standard patio umbrella poles up to 60mm diameter, with included hole cap for use without umbrella | |
|---|---|---|
| Leveling adjustment | Integrated adjustable non-slip foot pads on all chair and table base feet, compensates for uneven patio surfaces | |
| Cushion maintenance | Removable zippered cushion covers allow machine washing for seasonal cleaning, quick-dry foam resists mold and mildew | |
| Seating configuration | 4 stationary fixed-position armchairs arranged around table for 4-person outdoor dining, no swivel or rocking mechanisms | |
| Weather resistance | Rust-proof cast aluminum construction will not corrode, warp, or crack with regular rain, sun, and temperature exposure | |
| Table surface use | Textured non-porous cast top resists spills and scratches, can be wiped clean with damp cloth, supports standard dining place settings and serveware | |
| Assembly requirement | Knock-down construction requires bolt-together assembly of table base, table top, and chair frames with included hardware | |
| Finish durability | Scratch-resistant powder coat maintains appearance through regular use, resists chipping from moving serveware or chair contact | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential backyards and patios | Ideal for covered or uncovered outdoor dining areas, lawns, and garden spaces | |
|---|---|---|
| Small outdoor dining spaces | 4-person seating footprint fits on compact patios, balconies, and poolside decks | |
| Hospitality outdoor venues | Suitable for restaurant patios, café terraces, and resort guest seating areas | |
| Seasonal entertaining use | Supports casual meals, BBQ gatherings, and small family events for 4 adults | |
| Shaded patio configurations | Integrated umbrella hole allows adding a patio umbrella for sun protection during daytime use | |
| Coastal environment use | Rust-proof cast aluminum construction resists salt air corrosion better than steel outdoor furniture |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture - Seating and tables for camping, domestic and contract use - General safety requirements applicable | |
|---|---|---|
| EN 581-2:2019 | Outdoor furniture - Mechanical safety requirements for seating applicable for chair static load and stability testing | |
| EN 581-3:2019 | Outdoor furniture - Mechanical safety requirements for tables applicable for table top load and stability testing |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 24543-2009 | Outdoor furniture - General safety and performance requirements applicable for residential patio dining sets | |
|---|---|---|
| GB/T 17657-2013 | Test method for surface finish performance applicable for scratch, corrosion, and UV resistance verification | |
| GB 28481-2012 | Restriction of hazardous substances in furniture applicable for lead and heavy metal content in coating materials |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 24543-2009: Outdoor furniture - General safety and performance requirements applicable for residential patio dining sets; 2. GB/T 17657-2013: Test method for surface finish performance applicable for scratch, corrosion, and UV resistance verification; 3. GB 28481-2012: Restriction of hazardous substances in furniture applicable for lead and heavy metal content in coating materials; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool