| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Finished Seat Cushion Thickness | 90 mm | |
|---|---|---|
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Total set weight | 30 kg | |
|---|---|---|
| Single chair weight | 4.5 kg | |
| Table static load capacity | 50 kg | |
| Seating capacity | 4 people | |
| Weather exposure durability | 1000 hours of UV exposure | |
| Chair stack count | 4 units | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Chair frame construction | 1.2mm thick powder-coated aluminum tubing | |
|---|---|---|
| Chair seat and back weave | UV-stabilized PE synthetic rattan | |
| Chair joint bindings | White resin wrapped fasteners | |
| Table frame construction | 1.2mm thick powder-coated aluminum tubing | |
| Tabletop surface | Woven PE mesh panel | |
| Table edge trim | Aluminum profile with matching rattan wrap | |
| Foot glides | Hard plastic non-marking caps | |
| Weave thickness | 3mm diameter PE rattan | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Drainage performance | Open weave seat and tabletop | |
|---|---|---|
| Stackable storage | Nesting chair frame design | |
| Mobility feature | Lightweight chair construction | |
| Armrest support | Curved integrated armrests | |
| Surface stability | Four-point table leg contact | |
| Surface protection | Non-marring foot caps | |
| Maintenance requirement | Wipe-clean woven surfaces | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Shipping carton dimensions | 760 x 760 x 120 mm (table), 620 x 600 x 880 mm (chairs) | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential patio use | Small balconies, backyards, or garden terraces | |
|---|---|---|
| Commercial cafe seating | Sidewalk bistro service or outdoor coffee shop areas | |
| Poolside lounge areas | Water-resistant construction withstands splashes and high humidity | |
| Courtyard tea service | Formal and casual outdoor entertaining for small groups | |
| Rental property furnishing | Durable, low-maintenance design for short-term rental outdoor spaces | |
| Balcony dining for apartments | Fits compact urban balconies with minimal clearance required | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
