Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	540 × 590 × 890 mm
Seat height	460 mm
Seat depth	490 mm
Seat width	460 mm
Backrest height from seat	430 mm
Armrest height from floor	660 mm
Frame tube diameter	28 mm
Frame tube wall thickness	1.5 mm
Stack nesting height per chair	120 mm
Floor contact pad diameter	20 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Recommended static load capacity	163 kg
Net weight per unit	5 kg
UV resistance rating	Grade 5
Water resistance	IPX5 suitable
Stackable storage capacity per stack	10 chairs
Warranty period	2 years
Frame finish durability	500 hours salt spray resistance
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Structural frame	1.5mm thick welded aluminum tubing with bamboo-effect powder coating
Seat and backrest weaving	UV-stabilized 8mm flat PE synthetic rattan with checkered dot pattern
Joint binding	UV-resistant white PE rattan wrap secured at all frame joints
Leg foot pads	Non-marking black rubber pads fitted to each leg base
Cross bracing	1.5mm thick round aluminum cross stretchers between legs
Armrest structure	Dual curved aluminum tubes wrapped in PE rattan, integrated with backrest
Frame finish coat	Bamboo-toned textured polyester powder coating
Rattan surface texture	Semi-matte woven finish with open grid for airflow
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Stackable nesting function	Chairs nest vertically with aligned leg sets to minimize storage footprint
Outdoor weather use	All-weather construction withstands rain, sun and temperature fluctuation
Fixed seating position	Non-reclining fixed upright frame optimized for bistro dining use
Surface protection function	Rubber foot pads prevent scuffing on stone, tile or wood patio surfaces
Quick drain function	Open grid rattan weave allows rainwater to drain freely without pooling
Low maintenance function	Washable rattan and rust-proof frame require no sealing or special treatment
Optional cushion compatibility	Seat accepts standard 450x450mm outdoor fabric tie-on cushions
Cross-brace stability function	Dual cross stretchers prevent leg racking during regular use
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Outdoor cafe and bistro seating	Commercial dining height fits standard 750mm patio tables for food service use
Residential patio and balcony use	Compact stackable design fits small balcony and garden dining spaces
Beachside and coastal venue use	Rust-proof aluminum frame resists salt air corrosion in coastal environments
Event rental seating	Stackable design enables fast transport and storage for outdoor events and weddings
Hotel terrace and poolside seating	Drainable open weave prevents water pooling near pool and wet terrace areas
Mixed color set configuration	Available in black, red and grey dot weave variants to match venue decor
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 581-1:2017	Outdoor furniture seating general safety requirements for domestic and contract use
EN 581-2:2019	Outdoor furniture seating mechanical safety and strength test methods

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

No standards data is available for this market.

Standardized tender description text

This product must meet the following technical requirements:
1. Technical standards and test reports must be supplied during tender or purchase confirmation;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · OB-STK-001

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · OB-STK-001

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · OB-STK-001Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Stackable Outdoor PE Wicker Bistro Armchair with Faux Bamboo Frame (Model OB-STK-001) is an unbranded outdoor seating solution designed for both commercial and residential use. Visually, it features a textured bamboo-toned polyester powder-coated finish on the frame, paired with semi-matte checkered dot pattern UV-stabilized 8mm flat PE synthetic rattan woven across the seat, backrest, and armrests. The dual curved armrests integrate seamlessly with the upright backrest, creating a streamlined bistro-style silhouette, while the open grid rattan weave balances visual lightness with functional airflow. Constructed for long-term outdoor durability, the chair uses a 1.5mm thick welded aluminum frame with 28mm diameter tubing, reinforced by matching round aluminum cross stretchers between legs. All frame joints are bound with UV-resistant white PE rattan wrap, and each leg base is fitted with non-marking black rubber pads. The seat is supported by a 14mm bent plywood or equivalent internal board, with the open rattan weave allowing free rainwater drainage. The frame delivers 500 hours of salt spray resistance, the rattan holds a Grade 5 UV resistance rating, and the construction meets IPX5 water resistance standards, supporting a recommended static load capacity of 163 kg per unit, with a net weight of 5 kg. Practically, the chairs nest vertically in aligned stacks of up to 10 units to minimize storage footprint, and their fixed non-reclining upright position is optimized for standard 750mm height patio dining tables. The rubber foot pads prevent scuffing on stone, tile, and wood surfaces, while the rust-proof, washable construction requires no sealing or special maintenance. The seat is compatible with standard 450x450mm outdoor tie-on cushions for added comfort, and the chair is available in black, red, and grey dot weave variants to coordinate with diverse decor schemes. It suits a wide range of spaces, including outdoor cafes and bistros, residential patios and compact balconies, coastal beachside venues with salt air exposure, event rental operations for weddings and outdoor gatherings, and hotel terraces and poolside areas. For procurement, note each set ships in 2 cartons with a total packaged gross weight of 23 kg and 0.26 m³ carton volume; assembly takes 40 minutes per set, and 135 sets fit in a 20GP container at 85% space utilization. The product includes a 2-year warranty.

Stackable Outdoor PE Wicker Bistro Armchair with Faux Bamboo Frame Specifications

Suppliers and stock