Product supplier6-Seat Rectangular Slatted Black Outdoor Dining Table, Cold-rolled steel slats with matte black powder coat
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 940 × 1626 × 749 mm | |
|---|---|---|
| Tabletop slat thickness | 25 mm | |
| Leg profile (square) | 60 x 60 mm | |
| Leg wall thickness | 1.5 mm | |
| Central umbrella hole diameter | 66 mm | |
| Undertable knee clearance height | 680 mm | |
| Tabletop slat gap width | 8 mm | |
| Undertable cross support bar size | 40 x 20 mm | |
| Foot leveler height adjustment | 10 mm | |
| Edge overhang past leg line | 50 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Static distributed tabletop load capacity | 136 kg | |
|---|---|---|
| Product net weight | 21.3 kg | |
| Seating capacity | 6 people | |
| Finish UV resistance rating | 500 hours | |
| Finish salt spray resistance | 1000 hours | |
| Finish abrasion resistance | 2000 cycles | |
| Frame static load per leg | 45 kg | |
| Limited residential warranty | 12 months | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop slats | Cold-rolled steel slats with matte black powder coat | |
|---|---|---|
| Support legs | Square steel tube legs with e-coat primer under powder coat | |
| Undertable bracing | Rectangular steel cross support bars welded to leg frames | |
| Surface finish | Electrophoretic e-coat primer plus polyester powder topcoat | |
| Umbrella hole insert | Injection-molded plastic ring insert | |
| Foot levelers | Nylon adjustable foot pads with threaded steel stems | |
| Assembly hardware | Zinc-plated steel bolts, nuts, and washers | |
| Steel gauge for frame | 1.5 mm thick cold-rolled steel | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Slatted top drainage | Parallel slat gaps allow rainwater runoff to prevent pooling | |
|---|---|---|
| Center umbrella compatibility | Central hole accommodates standard patio umbrella poles up to 66 mm diameter | |
| Uneven surface adjustment | Threaded nylon foot levelers adjust to compensate for uneven patio stone | |
| Fixed rigid frame | Welded and bolted steel frame provides rigid non-wobble dining surface | |
| Weather resistance | Multi-layer coated steel resists rust, corrosion, and UV fading in exterior conditions | |
| Easy surface cleaning | Smooth matte powder coat surface wipes clean with water and mild detergent | |
| Residential outdoor use | Structure designed for patio, garden, deck, and backyard dining applications | |
| Standard dining height | 749 mm surface height accommodates standard outdoor dining armchairs | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential patio dining | Suitable for covered or open stone patios adjacent to lawns for family meals | |
|---|---|---|
| Backyard garden entertaining | Accommodates 6 guests for outdoor gatherings and casual meals | |
| Deck outdoor dining | Corrosion-resistant coating suitable for elevated wood or composite deck installations | |
| Poolside casual dining | Slatted top drainage and rust-resistant finish suitable for pool-adjacent use | |
| Balcony small-space dining | Compact 6-seat footprint fits medium to large residential balconies | |
| Commercial cafe outdoor seating | Durable steel construction suitable for light-duty commercial patio dining | |
| Recommended configuration | Pair with 6 matching slatted metal outdoor armchairs for a coordinated 7-piece dining set |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Safety requirements for outdoor residential seating and tables, applicable for design verification | |
|---|---|---|
| EN 581-2:2019 | Mechanical safety test methods for outdoor tables, applicable for load testing |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable for structural safety | |
|---|---|---|
| GB/T 17657-2013 | Surface finish test methods for furniture, applicable for coating durability verification | |
| GB 28007-2011 | Safety requirements for children's furniture if used in family outdoor spaces |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable for structural safety; 2. GB/T 17657-2013: Surface finish test methods for furniture, applicable for coating durability verification; 3. GB 28007-2011: Safety requirements for children's furniture if used in family outdoor spaces; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool