| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 800 x 800 x 740 mm | |
|---|---|---|
| Armchair overall dimensions | 660 x 690 x 800 mm | |
| Seat height without cushion | 390 mm | |
| Seat surface dimensions | 490 x 520 mm | |
| Backrest dimensions | 550 x 320 mm | |
| Armrest height from floor | 650 mm | |
| Table underframe knee clearance height | 680 mm | |
| Table support leg spread diameter | 600 mm | |
| Chair leg footprint width | 580 mm | |
| Woven rattan strand thickness | 6 mm | |
| Frame tube wall thickness | 1.2 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Set total net weight range | 42 kg | |
|---|---|---|
| Per-chair static load capacity | 160 kg | |
| Seating capacity | 4 people | |
| Frame rust resistance lifespan | 3 years | |
| PE rattan UV fade resistance lifespan | 3 years | |
| Chair static tip resistance load | 30 kg | |
| Woven joint binding tensile strength | 80 kg | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Frame construction | 1.2mm powder-coated aluminum alloy with faux bamboo finish | |
|---|---|---|
| Seat and back woven material | 8mm flat PE synthetic rattan, white base with dark dot weave | |
| Joint binding material | 3mm solid PE rattan lashings, white color | |
| Tabletop surface | Woven PE rattan over rigid internal support board | |
| Frame foot pads | 15mm diameter non-slip black rubber foot caps | |
| Table support bracing | Powder-coated steel circular cross-brace under tabletop | |
| Chair back support structure | Curved metal frame integrated with armrests for continuous support | |
| Surface finish | Matte UV-stabilized coating on all frame components | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | 4 armchairs positioned evenly around square table for 4-person dining | |
|---|---|---|
| Chair storage compatibility | Chairs are fully nestable under table for compact storage when not in use | |
| Surface drainage | Open woven rattan table and seat surfaces allow rainwater drainage without pooling | |
| Leveling capability | Fixed rubber foot pads on all legs to prevent scratching hard patio surfaces | |
| Maintenance access | Woven surfaces can be wiped clean with mild soap and water for routine care | |
| Outdoor operation | Full set is designed for permanent patio, garden, or poolside placement without rust or degradation | |
| Back support ergonomics | Curved oval backrest provides lumbar support for upright dining posture | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio use | Suitable for home backyard, terrace, or balcony casual dining for 4 people | |
|---|---|---|
| Commercial cafe use | Ideal for outdoor bistro, coffee shop, or restaurant sidewalk seating | |
| Garden leisure use | Appropriate for garden, poolside, or courtyard casual drink and meal service | |
| Climate suitability | Designed for use in sunny, rainy, and humid outdoor conditions without rapid degradation | |
| Recommended complementary accessories | Compatible with 5cm thick removable waterproof seat cushions for extended comfort | |
| Surface compatibility | Suitable for placement on paved stone, concrete, wood deck, or tile patio surfaces |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture seating and tables general safety requirements | |
|---|---|---|
| EN 581-2:2019 | Outdoor furniture mechanical safety requirements for dining seating | |
| EN 581-3:2019 | Outdoor furniture mechanical safety requirements for dining tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to structural safety checks | |
|---|---|---|
| GB/T 28007-2011 | Outdoor furniture general technical requirements for durability and weather resistance | |
| GB 6675-2014 | Toy safety, applicable to sharp edge and pinch point hazard screening for public use |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to structural safety checks; 2. GB/T 28007-2011: Outdoor furniture general technical requirements for durability and weather resistance; 3. GB 6675-2014: Toy safety, applicable to sharp edge and pinch point hazard screening for public use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
