| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint | 1200 x 700 x 740 mm | |
|---|---|---|
| Table overall dimensions | 900 x 600 x 740 mm | |
| Tabletop slat gap | 10 mm | |
| Knee clearance under table | 660 mm | |
| Armchair overall dimensions | 680 x 580 x 910 mm | |
| Armchair seat dimensions | 510 x 460 mm | |
| Seat height from floor | 460 mm | |
| Armrest height from floor | 640 mm | |
| Backrest height above seat | 450 mm | |
| Sled base tube wall thickness | 1.5 mm | |
| Slat material thickness | 20 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Set total net weight | 35 kg | |
|---|---|---|
| Per-chair static weight capacity | 180 kg | |
| Table static load capacity | 90 kg | |
| Recommended seating capacity | 2 adults | |
| Slat surface water drainage rate | 100% | |
| Finish UV/rust resistance lifespan | 3 years | |
| Recommended warranty period | 1 year | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Frame and base construction | 1.5mm thick powder-coated galvanized steel | |
|---|---|---|
| Tabletop slats | 20mm thick powder-coated steel slats with rounded edges | |
| Chair seat slats | 20mm thick powder-coated steel slats, fastened with stainless steel bolts | |
| Chair back slats | 20mm thick powder-coated steel horizontal slats | |
| Integrated armrests | Bent tubular powder-coated steel, formed to connect seat to back frame | |
| Surface finish | Matte grey E-coat plus powder coating | |
| Foot contact pads | Non-marking rubber pads at sled base corners | |
| Fastener hardware | Stainless steel corrosion-resistant bolts and screws | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Frame design | Fixed welded cantilever sled base, no moving parts or recline functions | |
|---|---|---|
| Water shedding | Open parallel slat gaps on table and seats drain rainwater without pooling | |
| Leveling adjustment | Adjustable rubber foot pads on base corners for uneven deck surfaces | |
| Seating ergonomics | Fixed upright 100-degree backrest angle for upright dining posture | |
| Arm support | Continuous curved armrests integrated with frame for stable forearm support | |
| Assembly requirement | Bolt-together flat pack assembly with all required hardware included | |
| Stackability | Chairs nest partially under table to reduce storage footprint | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Small residential balcony use | Compact footprint fits narrow 1.2m+ deep balcony spaces for 2-person dining | |
|---|---|---|
| Waterfront deck/patio use | Rust-resistant finish suitable for high-humidity riverside or coastal exterior areas | |
| Apartment outdoor terrace use | Low-maintenance powder-coated surface requires only routine wipe cleaning | |
| Casual tea and light meal use | Dining-height surface sized for place settings, drinks, and small decor items | |
| Temporary outdoor event use | Lightweight steel construction allows easy repositioning for small gatherings | |
| Year-round exterior placement | All-weather slatted construction withstands rain and sun exposure without cushions | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture safety requirements for seating and tables, applicable for general safety compliance | |
|---|---|---|
| EN 581-2:2019 | Outdoor seating mechanical performance requirements, applicable for chair load and durability tests | |
| EN 581-3:2019 | Outdoor table mechanical performance requirements, applicable for table load and stability tests |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable for structural stability verification | |
|---|---|---|
| GB/T 17657-2013 | Test method for surface finish performance, applicable for coating adhesion and wear checks | |
| GB/T 24821-2009 | Outdoor furniture structural safety requirements, applicable for load and stability testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable for structural stability verification; 2. GB/T 17657-2013: Test method for surface finish performance, applicable for coating adhesion and wear checks; 3. GB/T 24821-2009: Outdoor furniture structural safety requirements, applicable for load and stability testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
