| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint | 2500 x 2500 mm | |
|---|---|---|
| Table overall dimensions | 1500 x 1500 x 730 mm | |
| Table floor-to-apron knee clearance | 675 mm | |
| Center umbrella hole diameter | 40 mm | |
| Chair overall dimensions | 560 x 630 x 900 mm | |
| Chair seat height from floor | 450 mm | |
| Chair seat usable dimensions | 450 x 420 mm | |
| Chair backrest height above seat | 450 mm | |
| Chair armrest height above seat | 200 mm | |
| Slat width for table and chairs | 70 mm | |
| Table leg cross-section dimensions | 50 x 50 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Single chair static weight capacity | 136 kg | |
|---|---|---|
| Table top static distributed weight capacity | 136 kg | |
| Individual chair net weight | 14 kg | |
| Recommended maximum seating capacity | 6 adults | |
| Frame finish rust resistance service life | 3 years | |
| Surface weather resistance temperature range | -20 to 60 °C | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Structural frame material and finish | 1.2mm thick steel tube with matte black E-coat and powder coating | |
|---|---|---|
| Table top slat material | 20mm thick weather-resistant wood-plastic composite (WPC) faux wood slats | |
| Chair seat and back slat material | 15mm thick weather-resistant WPC faux wood slats, teak finish | |
| Armrest construction | 25mm diameter curved powder-coated steel tube integrated into chair frame | |
| Foot glides | Non-marking plastic adjustable foot glides fitted to leg bases | |
| Fastener hardware | Stainless steel rust-resistant bolts and screws for all assembly points | |
| Slat gap spacing | 8mm uniform gaps between parallel slats for water drainage | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Slatted surface drainage | Parallel 8mm gaps between slats allow rainwater to drain freely without pooling | |
|---|---|---|
| Center umbrella hole compatibility | 40mm diameter center hole accommodates standard patio umbrellas for sun shading | |
| Chair stacking capability | Chairs are designed to stack vertically for compact off-season storage | |
| Foot glide adjustment | Plastic foot glides adjust to compensate for uneven paved patio surfaces | |
| Fixed seating position | Chairs have non-swivel, non-reclining fixed frames suited for dining use | |
| Surface maintenance | Smooth WPC and powder-coated surfaces wipe clean with damp cloth for routine care | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio use | Ideal for backyards, garden terraces, and balconies seating 6 for outdoor meals | |
|---|---|---|
| Commercial cafe seating | Suitable for outdoor bistro, coffee shop, and restaurant patio dining areas | |
| Poolside dining installation | Appropriate for pool decks, as WPC and coated steel resist chlorine and moisture damage | |
| Open-air event seating | Usable for outdoor weddings, community events, and pop-up dining spaces | |
| Recommended pairing | Pairs with a 38mm diameter patio umbrella for integrated sun shading over the table center | |
| Surface compatibility | Designed for use on paved stone, concrete, wood deck, and compacted gravel outdoor surfaces |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 Outdoor furniture - Seating and tables for camping, domestic and contract use | Applies to general safety requirements for outdoor domestic patio seating and tables | |
|---|---|---|
| EN 581-2:2019 Outdoor furniture - Mechanical safety requirements for seating | Applies to chair static load, stability, and durability performance testing for outdoor seating |
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for furniture | Applies to dimensional stability, structural safety, and finish quality requirements for outdoor metal furniture used in China | |
|---|---|---|
| GB 28481-2012 Limit of harmful substances in plastic furniture | Applies to heavy metal and formaldehyde emission limits for WPC plastic composite slat components |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for furniture: Applies to dimensional stability, structural safety, and finish quality requirements for outdoor metal furniture used in China; 2. GB 28481-2012 Limit of harmful substances in plastic furniture: Applies to heavy metal and formaldehyde emission limits for WPC plastic composite slat components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
