Product supplier6-Person Rectangular Faux Bamboo Perforated Woven Outdoor Patio Dining Set, 1.2mm thick powder-coated aluminum alloy
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 970 × 1800 × 760 mm | |
|---|---|---|
| Overall table dimensions | 1800 x 970 x 760 mm | |
| Seat height | 460 mm | |
| Seat width (between armrests) | 490 mm | |
| Seat depth | 440 mm | |
| Backrest height above seat | 450 mm | |
| Table leg crossbar height above ground | 320 mm | |
| Umbrella hole diameter | 50 mm | |
| Chair armrest height above seat | 180 mm | |
| Chair leg splay base diameter | 640 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Per-chair static weight capacity | 159 kg | |
|---|---|---|
| Tabletop distributed weight capacity | 75 kg | |
| Total set net weight | 68 kg | |
| Seating capacity | 6 adults | |
| UV-resistant woven material service life | 3 years | |
| Powder coating corrosion resistance | 1000 hours salt spray | |
| Stackable chair storage count per stack | 6 units | |
| Anti-slip foot pad static friction coefficient | 0.6 | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Table and chair frames | 1.2mm thick powder-coated aluminum alloy | |
|---|---|---|
| Tabletop and seat/back surfaces | 4mm diameter white PE synthetic rattan perforated weave | |
| Frame joint wraps | White woven PE rattan binding | |
| Cross support bracing | 1.0mm thick round steel tube | |
| Chair leg tips | Black non-marking rubber foot pads | |
| Frame surface finish | Outdoor-grade matte gold powder coating | |
| Weave construction | Hand-woven open perforated pattern | |
| Armrest structure | Curved rattan-wrapped aluminum tube | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Center table umbrella hole | 50mm diameter opening for standard patio umbrella | |
|---|---|---|
| Adjustable foot levelers | 10mm height adjustment range on table legs | |
| Stackable chair design | Chairs nest vertically for off-season storage | |
| Open perforated weave drainage | Self-draining surface prevents standing water after rain | |
| Knock-down assembly structure | Bolt-connected frame components for flat-pack shipping | |
| Curved back ergonomic support | Rounded back contour supports lumbar region during meals | |
| Integrated crossbar footrest | Under-table metal crossbar provides foot support for seated diners | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential patio dining | Suitable for backyard stone patios and garden terraces for family meals | |
|---|---|---|
| Commercial cafe bistro seating | Suited for sidewalk cafes and outdoor restaurant dining areas | |
| Poolside leisure dining | Appropriate for pool decks and outdoor entertainment zones | |
| Balcony dining for large apartments | Fits spacious covered or uncovered residential balconies | |
| Event rental use | Suitable for outdoor weddings, parties and pop-up events | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 581-1:2017 Outdoor furniture seating and tables safety requirements | Applicable for general outdoor furniture safety performance verification | |
|---|---|---|
| EN 581-2:2019 Outdoor seating mechanical safety requirements | Applicable for chair static load, stability and durability testing | |
| EN 581-3:2019 Outdoor table mechanical safety requirements | Applicable for table load capacity, stability and impact resistance |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017: General technical requirements for furniture | Applicable for structural stability and safety verification of metal outdoor dining furniture | |
|---|---|---|
| GB/T 17657-2013: Test methods for surface finishes | Applicable for verifying powder coating adhesion and abrasion resistance | |
| GB 28481-2012: Restriction of hazardous substances in furniture | Applicable for material heavy metal and harmful substance limits |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for furniture: Applicable for structural stability and safety verification of metal outdoor dining furniture; 2. GB/T 17657-2013: Test methods for surface finishes: Applicable for verifying powder coating adhesion and abrasion resistance; 3. GB 28481-2012: Restriction of hazardous substances in furniture: Applicable for material heavy metal and harmful substance limits; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool