| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (table + chairs arranged) | 1600 x 1600 x 930 mm | |
|---|---|---|
| Table overall dimensions | 800 x 800 x 750 mm | |
| Table knee clearance height | 680 mm | |
| Table glass top thickness | 5 mm | |
| Chair overall dimensions per unit | 620 x 650 x 930 mm | |
| Chair seat height from floor | 450 mm | |
| Chair seat dimensions | 450 x 420 mm | |
| Chair backrest height above seat | 480 mm | |
| Frame tube wall thickness | 1.5 mm | |
| Table leg spread at base | 720 mm | |
| Chair leg spread at base | 550 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Total set net weight | 40 kg | |
|---|---|---|
| Single chair static weight capacity | 120 kg | |
| Table top static load capacity | 50 kg | |
| Recommended seating capacity | 4 people | |
| Frame corrosion resistance service life | 3 years | |
| Mesh fabric UV fade resistance | 1000 hours | |
| Tempered glass impact resistance | 10 kg drop from 1m | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table frame | 1.5mm thick aluminum tube with bronze powder-coated finish | |
|---|---|---|
| Table top | 5mm clear tempered safety glass with polished beveled edge | |
| Chair frames | 1.2mm thick aluminum tube with bronze powder-coated finish, welded joints | |
| Chair seat surfaces | UV-stabilized dark gray textilene woven mesh, tautly stretched over frame | |
| Chair backrest panels | Matching UV-stabilized dark gray textilene woven mesh | |
| Frame connection hardware | Stainless steel bolts and plastic joint caps | |
| Table support structure | Square cross-stretcher between splayed legs for lateral stability | |
| Chair support structure | Curved double-rail top back, circular lower seat stretcher for rigidity | |
| Foot pads | Non-slip plastic glides on all leg bases | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm |
Adjustment / rotation / tilt / mobility / storage features
| Weather-resistant performance | All components treated to resist rain, UV exposure, rust and fading for outdoor use | |
|---|---|---|
| Stackable storage for chairs | Chairs designed to stack vertically to 4 units high for compact off-season storage | |
| Knock-down assembly | Table legs attach to top frame with included hardware; chairs ship pre-welded | |
| Surface maintenance | Glass top and mesh surfaces wipe clean with mild soap and water, no special treatment required | |
| Umbrella compatibility | Table center accepts standard 48mm diameter patio umbrella pole | |
| Floor protection | Integrated plastic glides on all leg bases prevent scratching to hard patio surfaces | |
| Breathable seating | Woven mesh construction allows air circulation to reduce heat buildup in direct sun | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential patio use | Suitable for home backyards, garden patios and balcony dining areas for family meals | |
|---|---|---|
| Commercial outdoor seating | Suitable for cafe sidewalks, hotel terraces and resort poolside dining areas | |
| Waterside installation | Suitable for placement adjacent to pools, ponds and waterfront areas due to rust-resistant frame | |
| Temporary event seating | Suitable for outdoor parties, pop-up events and rental use due to lightweight stackable design | |
| All-weather placement | Designed to remain outdoors year-round in temperate climates without covering | |
| Recommended surface placement | For use on flat artificial turf, concrete, stone pavers or wooden deck surfaces | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| Outdoor furniture safety requirements | EN 581:2017 | |
|---|---|---|
| Outdoor furniture mechanical performance | EN 581:2019 |
Standards applicable to China-market projects
| Outdoor furniture glass safety | GB 15763.2 | |
|---|---|---|
| Metal furniture corrosion resistance | GB/T 3324 | |
| Furniture structural safety | GB/T 24821 |
This product must meet the following technical requirements: 1. Outdoor furniture glass safety: GB 15763.2; 2. Metal furniture corrosion resistance: GB/T 3324; 3. Furniture structural safety: GB/T 24821; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
