| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall bench dimensions | 1850 x 660 x 940 mm | |
|---|---|---|
| Seat surface width | 1750 mm | |
| Seat surface depth | 480 mm | |
| Seat height from floor | 430 mm | |
| Backrest total height | 510 mm | |
| Armrest height from seat | 210 mm | |
| Matching side table dimensions | 610 x 610 x 690 mm | |
| Side table lower shelf height | 220 mm | |
| Bench leg splay width at floor | 1720 mm | |
| Cast component wall thickness | 4 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Bench total static load capacity | 330 kg | |
|---|---|---|
| Bench net weight | 18 kg | |
| Powder coating UV fade resistance | 500 hours | |
| Recommended user capacity | 3 adults | |
| Limited warranty period | 1 year | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Bench and table frame | Sand-cast aluminum | |
|---|---|---|
| Exterior finish | Antique bronze powder coating | |
| Seat surface | Horizontal cast aluminum slats | |
| Backrest panel | Diamond-lattice cast aluminum | |
| Armrests | Curved ornate cast aluminum | |
| Bench legs | Splayed decorative cast aluminum | |
| Side table top | Perforated lattice cast aluminum | |
| Side table undershelf | Perforated cast aluminum | |
| Assembly hardware | Stainless steel bolts and nuts | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Outdoor weather performance | Fully rust-proof, water-resistant, UV-stable construction | |
|---|---|---|
| Seat drainage | Open slat seat design allows rainwater to drain freely | |
| Knock-down assembly | Bench and table ship flat with required hardware | |
| Surface maintenance | Wipe-clean smooth cast surfaces with no porous material | |
| Structural stability | Four-point splayed leg contact on both bench and table | |
| Ergonomic back support | Arched curved backrest with central lumbar medallion | |
| Armrest support | Wide curved armrests at both bench ends | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio installation | Suitable for wood/composite decks and stone patios | |
|---|---|---|
| Public park seating | Durable cast construction for high-traffic municipal green spaces | |
| Garden pathway placement | Positioned along walkways or next to garden beds for resting spots | |
| Porch and veranda use | Weatherproof construction for covered or uncovered front porch seating | |
| Balcony small-space set | Compact side table pairs with bench for narrow outdoor balconies |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture seating safety requirements, applicable for structural load and stability testing | |
|---|---|---|
| EN 581-2:2019 | Outdoor furniture mechanical performance requirements, applicable for seating durability validation | |
| EN 1022:2019 | Furniture seating stability test methods, applicable for bench tip resistance verification |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable for structural stability verification | |
|---|---|---|
| GB/T 17657-2013 | Surface coating performance test methods, applicable for powder coat adhesion and durability checks | |
| GB 28007-2011 | Furniture mechanical safety requirements, applicable for edge and sharp point hazard verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable for structural stability verification; 2. GB/T 17657-2013: Surface coating performance test methods, applicable for powder coat adhesion and durability checks; 3. GB 28007-2011: Furniture mechanical safety requirements, applicable for edge and sharp point hazard verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
