Product supplier5-Piece 4-Seat Outdoor Patio Dining Set with Tile Top Table and Lattice-Back Chairs, 1.5mm thick powder-coated dark steel tubing
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 940 × 940 × 750 mm | |
|---|---|---|
| Overall set footprint (table + 4 chairs arranged for use) | 2200 x 2200 mm | |
| Table central umbrella hole diameter | 51 mm | |
| Chair seat width (usable surface) | 510 mm | |
| Chair seat depth (usable surface) | 510 mm | |
| Chair seat height (with cushion) | 460 mm | |
| Chair armrest height above floor | 660 mm | |
| Seat cushion thickness | 102 mm | |
| Table leg cross-brace height above floor | 200 mm | |
| Table apron height below tabletop | 60 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Single chair static weight capacity | 136 kg | |
|---|---|---|
| Tabletop static distributed load capacity | 91 kg | |
| Total set net weight (unpackaged) | 82 kg | |
| Stackable chair storage height (4 chairs stacked) | 1200 mm | |
| Seating capacity | 4 adults | |
| Frame weather resistance service life (proper maintenance) | 3 years | |
| Cushion fabric UV fade resistance rating | 500 hours | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Table and chair frame | 1.5mm thick powder-coated dark steel tubing | |
|---|---|---|
| Tabletop | 8mm thick matte ceramic tile inset in metal frame | |
| Seat cushion core | 40kg/m³ density polyurethane outdoor foam | |
| Cushion upholstery | 260g/m² UV-stabilized water-repellent polyester fabric | |
| Cushion fasteners | Woven fabric tie straps sewn to cushion corners | |
| Frame finish | Dual E-coat + polyester powder coat with rust inhibitor | |
| Table foot caps | Non-marking rubber foot pads on each leg end | |
| Chair armrests | Curved tubular steel matching frame finish | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Chair storage function | Vertical stackable design for off-season space-saving storage | |
|---|---|---|
| Cushion removal | Tie-on cushions are fully removable for cleaning or seasonal storage | |
| Table umbrella compatibility | Central table hole accepts standard patio umbrella poles up to 51mm diameter | |
| Table stability adjustment | Legs include leveling feet to compensate for uneven paved patio surfaces | |
| Surface weather resistance | Powder-coated frame and tiled top withstand rain and UV exposure without rapid degradation | |
| Assembly requirement | Knock-down assembly with included hardware for table frame and chair components | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential patio or garden dining area | Sized for 4-person outdoor meals on paved or landscaped residential yards | |
|---|---|---|
| Poolside lounge seating areas | Weather-resistant construction withstands occasional splash and UV exposure near pools | |
| Small balcony terrace for urban apartments | Stackable storage enables compact storage when not in use on small outdoor spaces | |
| Cafe or small bistro outdoor seating | Durable metal construction supports frequent commercial light-duty outdoor use | |
| Seasonal outdoor entertaining spaces | Removable cushions allow easy adaptation to changing weather conditions | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 581-1:2017 Outdoor furniture - Seating and tables for camping, domestic and contract use | Applicable for basic safety and structural performance verification | |
|---|---|---|
| EN 581-2:2019 Outdoor furniture - Mechanical safety requirements for seating | Applicable for chair static load and durability acceptance testing | |
| EN 581-3:2017 Outdoor furniture - Mechanical safety requirements for tables | Applicable for table stability and load capacity acceptance testing |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for metal furniture | Applicable for dimensional tolerance and structural stability acceptance of metal frames | |
|---|---|---|
| GB/T 19001-2016 Quality management systems | Recommended minimum quality system for furniture supply chain verification |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for metal furniture: Applicable for dimensional tolerance and structural stability acceptance of metal frames; 2. GB/T 19001-2016 Quality management systems: Recommended minimum quality system for furniture supply chain verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool