Product supplier3-Piece Brown PE Wicker Outdoor Patio Bistro Set with Round Tempered Glass Top Table, 5mm flat brown all-weather PE resin wicker
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 750 × 750 × 740 mm | |
|---|---|---|
| Overall set footprint (table + 2 chairs) | 1600 x 1500 x 890 mm | |
| Table glass top diameter | 750 mm | |
| Tempered glass tabletop thickness | 5 mm | |
| Table lower circular footrest diameter | 450 mm | |
| Chair seat width | 480 mm | |
| Chair seat depth | 450 mm | |
| Chair seat height from ground | 460 mm | |
| Chair backrest height above seat | 430 mm | |
| Chair armrest height above ground | 660 mm | |
| Table leg foot spread diameter | 700 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total set net weight | 20 kg | |
|---|---|---|
| Per-chair static weight capacity | 160 kg | |
| Tabletop static load capacity | 50 kg | |
| Recommended maximum user weight per seat | 136 kg | |
| Set seating capacity | 2 adults | |
| Outdoor UV and fade resistance lifespan | 3 years | |
| Standard limited warranty period | 365 days | |
| Cushion foam density | 30 kg/m³ | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Chair seat/back/arm woven material | 5mm flat brown all-weather PE resin wicker | |
|---|---|---|
| Structural frame (table legs, chair legs/arms) | 1.2mm thick powder-coated aluminum with faux bamboo brown finish | |
| Wicker joint binding straps | 3mm wide synthetic rattan binding | |
| Tabletop surface | 5mm thick smoked tempered safety glass | |
| Table edge trim | Round aluminum rattan-matched brown trim ring | |
| Table lower footrest ring | Powder-coated aluminum circular stretcher | |
| Seat cushion fill (included standard) | 100mm thick high-density polyurethane foam | |
| Cushion outer fabric | 180g/m² water-resistant polyester with zippered removable cover | |
| Leg foot caps | 10mm thick non-slip rubber end caps | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Table glass top design | Removable secured glass top with edge restraint | |
|---|---|---|
| Chair construction | Fully assembled fixed integrated arm-back woven frame | |
| Cushion design | Removable zippered cushion covers | |
| Table lower ring function | Circular footrest and structural bracing | |
| Frame weather performance | Rust-proof powder-coated aluminum frame | |
| Wicker performance | Tightly woven PE wicker construction | |
| Floor protection | Non-marking rubber foot caps on all legs | |
| Assembly requirement | Minimal table leg assembly with included hardware | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Small residential balcony use | Compact 1.6m footprint fits standard apartment balconies for 2-person leisure seating | |
|---|---|---|
| Garden patio or courtyard placement | Weather-resistant construction suitable for permanent placement next to garden walls or paths | |
| Commercial café bistro seating | Durable frame and easy-to-clean surfaces suitable for small outdoor café table settings | |
| Porch or sunroom casual seating | Lightweight design works for covered porch or enclosed sunroom tea/reading use | |
| Poolside lounge seating | Rust-proof frame and water-resistant materials tolerate splashes and humid poolside environments | |
| Recommended complementary accessories | Fitted weather protective cover for off-season storage | |
| Small rooftop terrace installation | Lightweight aluminum frame is easy to position on weight-limited rooftop terrace spaces |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| Outdoor furniture seating safety requirements | EN 581:2017 | |
|---|---|---|
| Outdoor furniture mechanical safety for tables | EN 581:2017 |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| Outdoor furniture safety general requirements | GB 28007 | |
|---|---|---|
| Tempered glass for furniture use | GB 15763.2 | |
| Furniture mechanical performance test for chairs | GB/T 10357.3 | |
| Furniture mechanical performance test for tables | GB/T 10357.1 |
Standardized tender description text
This product must meet the following technical requirements: 1. Outdoor furniture safety general requirements: GB 28007; 2. Tempered glass for furniture use: GB 15763.2; 3. Furniture mechanical performance test for chairs: GB/T 10357.3; 4. Furniture mechanical performance test for tables: GB/T 10357.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool