Product supplier5-Piece Industrial Metal Slatted Bistro Dining Set, Powder-coated steel slats, matte black finish
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1070 × 1070 × 750 mm | |
|---|---|---|
| Overall set footprint | 2200 x 2200 x 850 mm | |
| Table central pedestal column diameter | 89 mm | |
| Table cross base span | 780 mm | |
| Table slat thickness | 25 mm | |
| Chair seat height | 460 mm | |
| Chair seat dimensions | 360 x 360 mm | |
| Chair backrest height above seat | 390 mm | |
| Knee clearance under table | 680 mm | |
| Leg splay span per chair | 440 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total set net weight | 50 kg | |
|---|---|---|
| Single chair static load capacity | 136 kg | |
| Chair stack height for 4 units | 1200 mm | |
| Leveling glide adjustment range | 10 mm | |
| Recommended seating capacity | 4 people | |
| Frame powder coat scratch resistance | 1000 cycles | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Table top slats | Powder-coated steel slats, matte black finish | |
|---|---|---|
| Table pedestal column | 2mm thick steel tubular column, matte black powder coat | |
| Table cross base | 3mm thick pressed steel cross foot, black finish | |
| Leveling glides | Nylon base with threaded steel insert | |
| Chair frame and legs | 1.2mm thick stamped steel, matte black powder coat | |
| Chair seat slats | Pressed steel slatted seat, matching black finish | |
| Chair backrest | Stamped steel panel with curved tubular top rail | |
| Chair under-seat bracing | Steel cross X-brace welded under seat | |
| Chair leg floor caps | Injection-molded plastic end caps | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Table 360-degree legroom access | Central pedestal design eliminates corner legs | |
|---|---|---|
| Chair stackable storage | Chairs nest vertically when not in use | |
| Floor leveling adjustment | Threaded glides on table base turn to adjust height | |
| Floor scratch protection | Plastic caps on all chair and table feet | |
| Weather-resistant surface drainage | Slatted gaps on table and seats allow water runoff | |
| Wipe-clean maintenance | Smooth powder-coated surfaces wipe clean with damp cloth | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Cafe and bistro seating | Compact 4-seat layout for small food service venues | |
|---|---|---|
| Small apartment dining nook | Space-saving footprint for compact residential kitchens | |
| Covered outdoor patio seating | Weather-resistant slatted surfaces for semi-outdoor use | |
| Breakroom seating | Durable stackable design for office break rooms | |
| Pop-up event seating | Lightweight stackable set for temporary event setups |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| Outdoor furniture structural stability | EN 581:2017 | |
|---|---|---|
| Metal furniture mechanical strength | EN 15372:2016 |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| Metal furniture structural safety | GB/T 3324 | |
|---|---|---|
| Furniture surface coating safety | GB 18584 |
Standardized tender description text
This product must meet the following technical requirements: 1. Metal furniture structural safety: GB/T 3324; 2. Furniture surface coating safety: GB 18584; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool