| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint | 1850 x 1850 x 880 mm | |
|---|---|---|
| Table overall dimensions | 1210 x 1210 x 760 mm | |
| Table center umbrella hole diameter | 50 mm | |
| Lower table lattice shelf diameter | 350 mm | |
| Chair overall dimensions | 630 x 680 x 880 mm | |
| Chair seat height | 460 mm | |
| Chair seat dimensions | 500 x 480 mm | |
| Seat cushion thickness | 75 mm | |
| Armrest height above seat | 200 mm | |
| Backrest height above seat | 420 mm | |
| Under-table knee clearance height | 660 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Total set net weight | 82 kg | |
|---|---|---|
| Per-chair static weight capacity | 180 kg | |
| Table top static load capacity | 91 kg | |
| Cushion foam density | 35 kg/m³ | |
| Cushion foam rebound rate | 45% | |
| Finish UV fade resistance lifespan | 3 years | |
| Frame limited warranty period | 3 years | |
| Cushion fabric limited warranty period | 1 year | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table and chair frame construction | Sand-cast aluminum, 4mm average wall thickness | |
|---|---|---|
| Frame surface finish | Antique bronze thermoset powder coating, 80μm thickness | |
| Table top surface | Embossed cast aluminum with decorative lattice pattern | |
| Lower table shelf | Cast aluminum open lattice ring, same bronze finish as frame | |
| Seat cushion cover fabric | 280g/m² solution-dyed polyester outdoor fabric | |
| Cushion fill material | 100% polyurethane open-cell outdoor foam | |
| Chair and table foot pads | 18mm diameter hard rubber/TPR adjustable glides | |
| Assembly hardware | Zinc-plated steel bolts, nuts and washers | |
| Umbrella hole insert | 2mm thick injection-molded plastic ring | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm |
Adjustment / rotation / tilt / mobility / storage features
| Center table umbrella hole | Accommodates standard 50mm diameter patio umbrellas for sun shading | |
|---|---|---|
| Adjustable foot glides | Rotate 8mm maximum height to level set on uneven outdoor patios | |
| Fixed chair frame | Non-reclining, non-folding rigid cast frame for stable permanent outdoor seating | |
| Removable seat cushions | Tie-on cushions lift off for cleaning, storage or seasonal replacement | |
| Lower lattice shelf | Provides open storage for outdoor dining accessories below table top | |
| Open lattice backrests | Allow airflow through chair backs for cool seating in warm weather | |
| Curved integrated armrests | Cast as part of chair frame for stable arm support during dining use | |
| Knock-down assembly | All components ship flat for on-site assembly with included hardware | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential patio dining | Seats 4 adults for outdoor meals on back patios, decks or garden terraces | |
|---|---|---|
| Balcony small group seating | Fits compact covered balconies for casual outdoor dining for households | |
| Cafe outdoor seating areas | Suitable for small commercial bistro patio seating for restaurant customers | |
| Poolside dining zones | Rustproof aluminum construction resists pool water splashes and humid air | |
| Seasonal outdoor use | Cushions can be stored indoors during off-seasons to extend product lifespan | |
| Umbrella-compatible shading setup | Center hole allows adding a patio umbrella for sun protection during daytime use | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Safety requirements for outdoor seating and tables for domestic use, core performance reference | |
|---|---|---|
| EN 581-2:2019 | Mechanical safety test methods for outdoor dining furniture structural stability |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable to cast aluminum dining set structural safety | |
|---|---|---|
| GB/T 17657-2013 | Test method for surface finish adhesion and abrasion resistance for metal furniture coatings | |
| GB 28007-2011 | Safety requirements for children's furniture, applicable if set is used in family outdoor spaces with children |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable to cast aluminum dining set structural safety; 2. GB/T 17657-2013: Test method for surface finish adhesion and abrasion resistance for metal furniture coatings; 3. GB 28007-2011: Safety requirements for children's furniture, applicable if set is used in family outdoor spaces with children; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
