| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (arranged around table) | 1070 x 1070 x 890 mm | |
|---|---|---|
| Round table diameter | 1070 mm | |
| Table height (dining surface) | 710 mm | |
| Individual chair overall dimensions | 640 x 635 x 890 mm | |
| Chair seat height from ground | 460 mm | |
| Chair seat width | 560 mm | |
| Chair seat depth | 510 mm | |
| Chair backrest height above seat | 430 mm | |
| Curved armrest height above seat | 200 mm | |
| Table leg spread diameter at base | 920 mm | |
| Chair leg tube diameter | 22 mm | |
| Woven material strand width | 8 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Total set net weight | 45 kg | |
|---|---|---|
| Static weight capacity per chair | 160 kg | |
| Static weight capacity of table top | 80 kg | |
| Recommended seating capacity | 4 adults | |
| Frame rust protection service life (covered storage) | 3 years | |
| Woven material UV fade resistance lifespan | 2 years | |
| Seat weave static load cycle rating | 10000 cycles | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Chair frame | 1.2mm thick powder-coated steel with bamboo-look bronze finish | |
|---|---|---|
| Seat and back weaving | Grey mixed-tone all-weather PE resin rattan, 8mm strand width | |
| Woven joint binding | Black synthetic wrap fasteners at frame-weave intersections | |
| Table top | 2mm thick matte black powder-coated solid steel round top | |
| Table frame and legs | 1.5mm thick black powder-coated steel with cross-brace base | |
| Armrests | Curved powder-coated steel matching bamboo-look frame finish | |
| Frame surface treatment | Electrostatic powder coating for rust and scratch resistance | |
| Foot glides | Hard plastic non-marking glides at each chair leg base | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Four independent armchairs arranged circularly around central table | |
|---|---|---|
| Chair stackability | Chairs stack vertically for compact off-season storage | |
| Table surface function | Smooth non-porous top holds drinks and small dining items with no umbrella hole | |
| Assembly requirement | Knock-down assembly with included hardware, partial pre-assembly of chair frames | |
| Leg stability | Four angled legs per chair and four table legs with cross bracing prevent wobble | |
| Cleaning access | Open woven seat/back design allows quick water drainage after rain | |
| Surface protection | Plastic foot glides prevent scratching composite deck and patio surfaces | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential balcony use | Suitable for small 1.2 m deep apartment balconies, compact footprint fits tight outdoor spaces | |
|---|---|---|
| Backyard deck or patio dining | Ideal for casual drinks, light meals and afternoon tea for 4 adults on residential decks | |
| Commercial cafe outdoor seating | Appropriate for small sidewalk cafe bistro seating with weather-resistant construction | |
| Garden terrace placement | Works for garden terrace seating adjacent to planters, trellises or landscaping features | |
| Poolside casual seating | Suitable for poolside use with water-resistant weave and rust-proof metal frames | |
| Recommended complementary accessories | Pairs with fitted outdoor furniture cover for extended off-season protection | |
| Surface compatibility | Safe for use on composite deck, tile, concrete and stone patio surfaces with non-marking glides |
EU Market Access Requirements* EN Standards
| Outdoor furniture seating mechanical safety | EN 581:2017 | |
|---|---|---|
| Outdoor furniture table mechanical safety | EN 581:2017 | |
| Outdoor furniture weather resistance test | EN 15286:2007 |
Standards applicable to China-market projects
| Outdoor furniture structural safety | GB/T 28009 | |
|---|---|---|
| Metal furniture coating performance | GB/T 3325 | |
| Wicker furniture technical specification | GB/T 34441 |
This product must meet the following technical requirements: 1. Outdoor furniture structural safety: GB/T 28009; 2. Metal furniture coating performance: GB/T 3325; 3. Wicker furniture technical specification: GB/T 34441; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
