Product supplier7-Piece Cast Aluminum Outdoor Patio Dining Set with Red Seat Cushions, Cast aluminum alloy with matte black powder-coated finish
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1524 × 914 × 724 mm | |
|---|---|---|
| Overall set footprint | 1524 x 914 x 724 mm | |
| Tabletop dimensions | 1524 x 914 mm | |
| Table height | 724 mm | |
| Center umbrella hole diameter | 51 mm | |
| Chair seat height without cushion | 450 mm | |
| Chair seat width between armrests | 495 mm | |
| Chair seat depth | 470 mm | |
| Seat cushion thickness | 71 mm | |
| Table leg wall thickness | 4 mm | |
| Knee clearance under table apron | 660 mm | |
| Armrest height from floor | 660 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Single chair static weight capacity | 160 kg | |
|---|---|---|
| Tabletop uniform static load capacity | 100 kg | |
| Total packed set gross weight | 75 kg | |
| Powder coating salt spray resistance | 500 hours | |
| Cushion fabric UV fade resistance | 1000 hours | |
| Seating capacity | 6 people | |
| Adjustable foot leveler adjustment range | 10 mm | |
| Limited warranty period | 1 year | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Table frame and legs | Cast aluminum alloy with matte black powder-coated finish | |
|---|---|---|
| Tabletop surface | Perforated lattice cast aluminum | |
| Chair frames, backrests and armrests | Cast aluminum alloy with matte black powder-coated finish | |
| Seat cushion core | High-resilience polyurethane foam | |
| Cushion upholstery | Outdoor-grade solution-dyed polyester fabric | |
| Leveling feet pads | Reinforced nylon with rubber anti-slip base | |
| Assembly hardware | Zinc-plated stainless steel fasteners | |
| Umbrella hole insert ring | ABS plastic with matching black finish | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Center umbrella hole accommodation | Fits 51mm diameter patio umbrella poles with cover cap | |
|---|---|---|
| Adjustable foot levelers | Threaded feet adjust to compensate for uneven paved patio surfaces | |
| Removable seat cushions | Cushions secure to chair seats with fabric ties for easy removal and cleaning | |
| Openwork tabletop drainage | Lattice perforations allow rainwater to drain freely without pooling | |
| Fixed-position armchair seating | Chairs have no swivel, rocker or recline mechanisms for stable dining use | |
| Stackable chair storage | Chairs stack vertically for compact off-season storage | |
| Rust-resistant finish performance | Powder coating prevents corrosion from rain, humidity and poolside chlorine exposure | |
| Easy surface maintenance | Metal surfaces wipe clean with damp cloth, cushion covers are spot-cleanable | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential patio dining | Suited for backyards, garden terraces and poolside paved areas for 6-person meals | |
|---|---|---|
| Commercial outdoor hospitality | Appropriate for cafe, resort patio and restaurant open-air seating zones | |
| Waterside leisure placement | Corrosion-resistant construction works for lake, pond or coastal patio locations | |
| All-weather seasonal use | Designed for permanent outdoor placement without frequent storage required | |
| Casual tea and small gathering use | Table size accommodates tea service, light meals and small group entertaining | |
| Coordinated with 51mm patio umbrellas | Integrated umbrella hole supports matching shade umbrellas for sunny day use |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture seating and table safety performance requirements applicable for residential use | |
|---|---|---|
| EN 581-2:2019 | Outdoor furniture mechanical safety test methods applicable for structural load verification |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2020 | Lounge and outdoor seating performance standard applicable for chair load testing | |
|---|---|---|
| ANSI/BIFMA X5.5-2021 | Desk and table products performance standard applicable for table load verification |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements applicable for metal outdoor furniture structural safety | |
|---|---|---|
| GB/T 17657-2013 | Surface finish performance test method applicable for coating adhesion and durability |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements applicable for metal outdoor furniture structural safety; 2. GB/T 17657-2013: Surface finish performance test method applicable for coating adhesion and durability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool