| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 1800 x 970 x 760 mm | |
|---|---|---|
| Table apron clearance | 680 mm | |
| Tabletop slat gap | 8 mm | |
| Chair overall dimensions per unit | 590 x 640 x 910 mm | |
| Chair seat dimensions | 490 x 460 mm | |
| Chair seat height from floor | 440 mm | |
| Chair armrest height from floor | 640 mm | |
| Chair backrest height | 470 mm | |
| Chair leg taper length | 430 mm | |
| Center table umbrella hole diameter | 50 mm | |
| Table leg tube thickness | 1.5 mm | |
| WPC slat thickness | 20 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Total set net weight | 110 kg | |
|---|---|---|
| Per-chair static load capacity | 180 kg | |
| Seating capacity | 6 people | |
| Frame corrosion resistance lifespan | 3 years | |
| WPC slat UV fade resistance | 2000 hours | |
| Chair stackable storage quantity | 8 units | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table and chair frame | 1.5mm thick powder-coated black steel | |
|---|---|---|
| Tabletop slats | 20mm thick weatherproof wood-look WPC composite | |
| Chair seat slats | 20mm thick matching wood-look WPC composite | |
| Frame finish coating | Double-layer outdoor-grade electrostatic powder coat | |
| Foot glides | Non-slip injection-molded plastic protective caps | |
| Fasteners | 304 stainless steel assembly hardware | |
| Table edge trim | Black PVC edge banding | |
| Chair backrest panel | Single-piece formed powder-coated steel | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Table drainage design | Slatted tabletop with uniform gaps to shed rainwater | |
|---|---|---|
| Chair stackable storage | Armchairs stack vertically to reduce storage footprint | |
| Uneven surface adjustment | Replaceable foot glides to level set on uneven paved patios | |
| Umbrella compatibility | Center table hole accepts standard patio umbrella poles | |
| Surface cleaning | Smooth WPC slats wipe clean with mild detergent and water | |
| Assembly hardware fit | Knock-down construction with pre-drilled alignment holes | |
| Structural stability | Tapered splayed leg geometry resists tipping during regular use | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio use | Suitable for backyard paved patios and garden dining areas | |
|---|---|---|
| Commercial outdoor seating | Applicable for cafe, bistro and restaurant open-air seating areas | |
| Balcony dining space | Scaled for large covered balconies requiring seating for 6 diners | |
| Poolside dining area | Water and UV resistant materials suitable for pool perimeter placement | |
| Off-season storage | Stackable chairs and disassembled table store compactly in sheds or garages |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture safety requirements for general public and domestic use | |
|---|---|---|
| EN 581-2:2019 | Mechanical safety requirements for outdoor seating and tables | |
| EN 1022:2018 | Stability test standard for domestic and contract seating |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture applicable to WPC slat components | |
|---|---|---|
| GB/T 1992-2018 | General test method for metal furniture applicable to steel frame components |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture applicable to WPC slat components; 2. GB/T 1992-2018: General test method for metal furniture applicable to steel frame components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
