| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set table dimensions | 1700 x 970 x 740 mm | |
|---|---|---|
| Single chair overall dimensions | 890 x 635 x 570 mm | |
| Chair seat height from ground | 432 mm | |
| Chair seat usable dimensions | 495 x 457 mm | |
| Chair armrest height from ground | 635 mm | |
| Tempered glass tabletop thickness | 8 mm | |
| Metal frame tubing wall thickness | 1.5 mm | |
| Table leg cross-section diameter | 50 mm | |
| Under-table knee clearance height | 685 mm | |
| Seating per set | 6 | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 59 kg | |
|---|---|---|
| Total set net weight reference | 59 kg | |
| Finish weather resistance rating | UV-stabilized, rust-resistant powder coat | |
| Slat surface water drainage gap | 8 mm | |
| Recommended commercial warranty period | 2 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg | |
| Caster Rolling Durability Reference | Acceptance target 30000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table frame construction | 1.5mm black powder-coated steel tubing | |
|---|---|---|
| Tabletop panel | 8mm clear tempered safety glass with rounded edges | |
| Chair frame construction | 1.2mm black powder-coated steel tubing with welded joints | |
| Seat and back slats | UV-stabilized HDPE synthetic wood with wood-grain finish | |
| Armrest components | Synthetic wood slat top mounted to curved steel arm supports | |
| Frame surface finish | Dual e-coat plus powder coat black finish | |
| Foot glide pads | Non-marking plastic floor protection caps at leg bases | |
| Cross-brace supports | Steel tubular stretchers connecting table legs for rigidity | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Chair stackability for storage | Chairs stack vertically up to 6 units high | |
|---|---|---|
| Drainage performance | Slatted seat and back gaps allow instant rainwater runoff | |
| Assembly requirement | Table requires bolted leg assembly; chairs ship pre-assembled | |
| Surface stability | Adjustable non-marking glides compensate for uneven patio surfaces | |
| Seating configuration | Fixed non-reclining dining position with integrated arm support | |
| Table edge safety | Rounded table corners eliminate sharp contact points | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Note for logistics | Engineering for preliminary quotation, not supplier-measured data | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential patio application | Suitable for backyard, terrace, or balcony dining for 6 adults | |
|---|---|---|
| Commercial outdoor application | Ideal for cafe, bistro, or restaurant sidewalk dining areas | |
| Surface compatibility | Suited for tiled, concrete, wooden deck, or paved outdoor surfaces | |
| Climate suitability | Appropriate for year-round outdoor use in rain and sun exposure | |
| Storage convenience | Stackable chairs reduce off-season storage space by 70% | |
| Recommended accessory pairing | Compatible with standard 38mm diameter patio umbrellas if hole is added | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Safety requirements for outdoor seating furniture, applicable to dining chairs | |
|---|---|---|
| EN 581-2:2019 | Mechanical safety requirements for outdoor dining tables | |
| EN 12150-1:2015 | Tempered soda-lime silicate safety glass specification for tabletop |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to synthetic wood slat components | |
|---|---|---|
| GB/T 28008-2011 | Safety requirements for glass furniture, applicable to tempered glass tabletop | |
| GB 28481-2012 | Environmental requirement for plastic furniture, applicable to HDPE slat components |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to synthetic wood slat components; 2. GB/T 28008-2011: Safety requirements for glass furniture, applicable to tempered glass tabletop; 3. GB 28481-2012: Environmental requirement for plastic furniture, applicable to HDPE slat components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
