| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 940 x 940 x 711 mm | |
|---|---|---|
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Seating capacity | 4 adults | |
|---|---|---|
| Static distributed tabletop load | 180 kg | |
| Static leg load per leg | 45 kg | |
| Weather resistance rating | Rust and water resistant | |
| Fade resistance | UV-stabilized finish | |
| Product net weight | 15 kg | |
| Warranty period | 24 months | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop slats | Cold-rolled steel slats | |
|---|---|---|
| Frame and legs | Heavy-duty square steel tubing | |
| Surface finish | E-coat plus black powder coating | |
| Fasteners | Stainless steel assembly screws | |
| Finish coating thickness | 60 um | |
| Umbrella hole fitting | Injection-molded plastic ring | |
| Underside support bracing | Steel cross-brace under tabletop | |
| Foot pads | Non-slip plastic floor glides | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Drainage design | Slatted gaps allow rainwater runoff | |
|---|---|---|
| Umbrella compatibility | Central 40mm hole fits standard patio umbrellas | |
| Assembly requirement | Adult assembly required with included hardware | |
| Table adjustment | Fixed rigid four-leg structure | |
| Floor protection | Plastic glides prevent abrasion to paved surfaces | |
| Surface cleanability | Smooth powder coat resists staining and easy wipe-down | |
| Set compatibility | Pairs with four matching slatted metal outdoor armchairs | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential patio use | Suitable for backyards, balconies, and garden dining areas | |
|---|---|---|
| Commercial outdoor dining | Appropriate for cafe, bistro, and restaurant patio seating | |
| Four-person dining setup | Configured to hold four place settings and tableware | |
| Open-air paved spaces | Designed for placement on stone, concrete, or deck surfaces | |
| All-weather outdoor placement | Suitable for year-round exterior use without covered storage | |
| Matching set configuration | Designed to pair with coordinating slatted metal outdoor armchairs |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture safety requirements for domestic and contract seating/tables | |
|---|---|---|
| EN 581-2:2019 | Outdoor furniture mechanical safety requirements for dining tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable for structural safety | |
|---|---|---|
| GB/T 1732-1993 | Determination of impact resistance for paint films, applicable for finish durability | |
| GB/T 1865-2009 | Paints and varnishes - artificial weathering exposure, applicable for outdoor use |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable for structural safety; 2. GB/T 1732-1993: Determination of impact resistance for paint films, applicable for finish durability; 3. GB/T 1865-2009: Paints and varnishes - artificial weathering exposure, applicable for outdoor use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
