| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 1560 x 970 x 750 mm | |
|---|---|---|
| Overall single armchair dimensions | 640 x 720 x 970 mm | |
| Table apron-to-floor knee clearance | 690 mm | |
| Seat height (floor to seat top) | 460 mm | |
| Single chair seat dimensions | 500 x 460 mm | |
| Chair back height (seat top to back top) | 510 mm | |
| Armrest height (floor to armrest top) | 640 mm | |
| Center umbrella hole diameter | 51 mm | |
| Table leg cross-section | 80 x 80 mm | |
| Slat width (table and chairs) | 70 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Single chair static weight capacity | 160 kg | |
|---|---|---|
| Distributed tabletop static load capacity | 75 kg | |
| Total set net weight | 72 kg | |
| Coating weather resistance lifespan | 3 years | |
| Stackable chair storage capacity per stack | 6 chairs | |
| Slat UV fade resistance rating | Grade 4 | |
| Frame rust protection performance | 500 hours salt spray resistance | |
| Adjustable foot pad height adjustment range | 15 mm | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table and chair frame | 1.2mm thick powder-coated steel with E-coat rust primer | |
|---|---|---|
| Tabletop slats | 20mm thick HDPE wood-composite faux teak slats | |
| Chair seat and back slats | 18mm thick HDPE wood-composite matching table slats | |
| Armrests | Powder-coated curved steel tubing with rounded edge finish | |
| Foot pads | Non-slip injection-molded PP plastic adjustable leveling pads | |
| Fastener hardware | Stainless steel 304 rust-resistant screws and bolts | |
| Frame surface finish | Matte black textured powder coat for scratch resistance | |
| Slat surface finish | Embossed wood grain texture for anti-slip performance | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Chair stackability | Armchairs stack vertically 6 units high for off-season storage | |
|---|---|---|
| Table leveling | Adjustable foot pads on each leg compensate for uneven paved or grass-adjacent surfaces | |
| Umbrella compatibility | Center hole accepts standard 48mm diameter patio umbrella poles | |
| Surface maintenance | Slat and frame surfaces wipe clean with damp cloth, no sealing or special treatment required | |
| Seating configuration | 6 armchairs arranged around table with 2 positions per long side, 1 per short side | |
| Hardware assembly | Knock-down assembly with included allen wrench and illustrated instructions | |
| Weather exposure suitability | Rated for full outdoor exposure to rain, sun, and temperature fluctuations | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio use | Suitable for backyard paved patios, decks, or garden dining areas for family meals | |
|---|---|---|
| Commercial outdoor dining use | Applicable for cafe, bistro, or hotel terrace seating with regular cleaning maintenance | |
| Seating capacity | Accommodates 6 adults for full place setting dining, with sufficient elbow room per seat | |
| Climate suitability | Appropriate for temperate to subtropical climates with standard UV and rain exposure | |
| Recommended pairing | Compatible with standard 2.7m tall patio umbrellas and optional outdoor seat cushions | |
| Storage requirement | Chairs stack to minimize footprint when storing during off-season or inclement weather |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture seating and tables safety requirements for domestic use | |
|---|---|---|
| EN 581-2:2019 | Outdoor furniture mechanical safety requirements for seating, applicable to chair load tests | |
| EN 581-3:2017 | Outdoor furniture mechanical safety requirements for tables, applicable to table stability tests |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable to frame and structural integrity checks | |
|---|---|---|
| GB/T 28203-2011 | Furniture hardware performance requirements, applicable to fastener and joint durability | |
| GB 18584-2001 | Indoor decorating materials limit of harmful substances for wood-based furniture, applicable to composite slat emission checks |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable to frame and structural integrity checks; 2. GB/T 28203-2011: Furniture hardware performance requirements, applicable to fastener and joint durability; 3. GB 18584-2001: Indoor decorating materials limit of harmful substances for wood-based furniture, applicable to composite slat emission checks; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
