Name: 7-Piece Slatted Outdoor Patio Dining Set with 6 Armchairs
Brand: JINQIU
SKU: QQ7U0C

Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1660 × 950 × 750 mm
Overall table dimensions	1560 x 950 x 750 mm
Table slat width	70 mm
Table leg section	50 x 50 mm square steel tube
Overall chair dimensions	580 x 640 x 890 mm
Chair seat height	450 mm
Chair seat depth	450 mm
Chair armrest height	660 mm
Chair backrest height	440 mm
Chair leg tube diameter	30 mm square
Table edge overhang	50 mm
Under-table knee clearance height	650 mm
Slat gap width	10 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Set total net weight	84 kg
Table static load capacity	120 kg
Seating capacity	6 people
Stackable chair storage height	8 units
Frame corrosion resistance service life	3 years
WPC slat surface UV fade resistance	2 years
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles
Five-star Base Static Load Reference	Acceptance target ≥120 kg; chair reference load 150 kg

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Table frame construction	1.8 mm thick powder-coated carbon steel square tube
Tabletop slats	20 mm thick weather-resistant wood-look WPC composite
Chair frame construction	1.5 mm thick powder-coated carbon steel square tube
Chair seat and back slats	20 mm thick wood-look WPC composite
Frame surface finish	Matte black polyester powder coating
Foot pads	10 mm thick non-slip rubber
Hardware fasteners	304 stainless steel screws and bolts
Frame weld points	Full penetration ground welds at tube joints
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Surface water drainage	10 mm uniform gaps between all horizontal slats
Chair armrest support	Integrated steel frame armrests capped with WPC slats
Table level adjustment	Threaded adjustable rubber feet on each table leg
Chair storage	Vertical stackable design for off-season storage
Umbrella compatibility	65 mm diameter center umbrella hole with cap
Assembly hardware included	All required bolts, allen key and illustrated instruction manual
Frame weather protection	Powder coat finish resists rust, chipping and UV fading
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential patio application	Suitable for backyard, garden or balcony dining for family meals
Commercial outdoor seating	Applicable for cafe, bistro or restaurant patio dining areas
Event rental use	Ideal for outdoor wedding, party or event temporary seating
Climate suitability	Designed for temperate and subtropical outdoor environments
Recommended pairing	Compatible with 2.7 m diameter center-post patio umbrella
User demographic	Designed for adult users for casual or formal outdoor dining
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 581-1:2017	Outdoor furniture safety requirements for domestic and contract seating and tables
EN 581-2:2019	Mechanical safety and performance test methods for outdoor dining seating
EN 581-3:2019	Mechanical safety and performance test methods for outdoor dining tables

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applies to WPC slat structural performance
GB/T 24821-2009	Outdoor furniture structural safety requirements for metal framed dining sets
GB 18584-2001	Indoor decoration material hazardous substance limits, reference for material emission testing

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applies to WPC slat structural performance;
2. GB/T 24821-2009: Outdoor furniture structural safety requirements for metal framed dining sets;
3. GB 18584-2001: Indoor decoration material hazardous substance limits, reference for material emission testing;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · ODS-WPC-6SEAT-001

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · ODS-WPC-6SEAT-001

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · ODS-WPC-6SEAT-001Open Export Tool

Quick Actions

Post an RFQ

Product Description

The JINQIU 7-Piece Slatted Outdoor Patio Dining Set, model ODS-WPC-6SEAT-001, delivers a purpose-built 6-person seating solution for both residential and commercial outdoor dining spaces. The set pairs one rectangular dining table with six matching armchairs, defined by a cohesive slatted design that balances open visual weight with structured, approachable styling. Matte black powder-coated steel frames contrast against warm wood-look WPC composite slats across table tops, chair seats, chair backs, and integrated armrest caps, creating a streamlined aesthetic that complements casual and formal outdoor decor schemes alike. The table’s frame is constructed from 1.8 mm thick powder-coated carbon steel square tube with full penetration ground welds at every joint, while chairs use 1.5 mm thick powder-coated carbon steel frames for resilient, lightweight support. All horizontal slats are 20 mm thick weather-resistant WPC composite, with uniform 10 mm gaps between slats to enable consistent surface water drainage. Frame surfaces feature a matte black polyester powder coating that resists rust, chipping, and UV fading, while 304 stainless steel hardware prevents fastener corrosion, and 10 mm thick non-slip rubber foot pads protect flooring surfaces. Chair seats include a 14 mm bent plywood internal support board topped with 45 kg/m³ density foam offering 65% rebound for seated comfort, and each table leg is fitted with a threaded adjustable rubber foot to stabilize placement on uneven ground. The table includes a 65 mm diameter center umbrella hole with a matching cap, compatible with 2.7 m diameter center-post patio umbrellas, and chairs feature a vertical stackable design that supports storage of up to 8 stacked units for off-season space savings. All required assembly hardware, an allen key, and illustrated instruction manual are included, with a reference assembly time of 40 minutes per set. This set is suited for residential backyards, gardens, and balconies for family meals, as well as commercial cafe, bistro, and restaurant patio areas, and temporary outdoor wedding, party, or event rental seating. It is engineered for use in temperate and subtropical outdoor environments, with a 3-year frame corrosion resistance service life and 2-year WPC slat surface UV fade resistance rating, designed for adult users. For procurement, note the set ships in 2 cartons per unit, with 135 sets fitting a 20GP container at 85% space utilization; the set has a total net weight of 84 kg, with a 120 kg table static load capacity.

7-Piece Slatted Outdoor Patio Dining Set with 6 Armchairs Specifications

Suppliers and stock