| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 2200 x 920 x 750 mm | |
|---|---|---|
| Tabletop slat thickness | 25 mm | |
| Table leg square section | 60 x 60 mm | |
| Under-table apron clearance height | 690 mm | |
| Center umbrella hole diameter | 40 mm | |
| Overall chair dimensions | 650 x 640 x 890 mm | |
| Chair seat height from floor | 420 mm | |
| Chair seat dimensions | 490 x 450 mm | |
| Chair backrest height | 440 mm | |
| Armrest height from floor | 640 mm | |
| Slat gap spacing | 10 mm | |
| Chair leg tube diameter | 30 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Table distributed static load capacity | 150 kg | |
|---|---|---|
| Total set net weight | 95 kg | |
| Seating capacity | 6 people | |
| Powder coating finish durability | 3 years | |
| Faux wood slat weather resistance | 10 years | |
| Chair stackability count | 8 chairs | |
| Floor glide load rating per leg | 50 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table and chair frame | White powder-coated carbon steel | |
|---|---|---|
| Tabletop slats | Weather-resistant HDPE faux teak slats | |
| Chair seat slats | Matching HDPE faux teak slats | |
| Chair backrest slats | Matching HDPE faux teak slats | |
| Armrest construction | Curved powder-coated steel tubing | |
| Leg floor glides | Injection-molded nylon glides | |
| Assembly hardware | Zinc-plated steel bolts and nuts | |
| Frame wall thickness | 1.5 mm | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Drain-through slat design | Open gaps between slats allow rainwater to drain immediately | |
|---|---|---|
| Stackable chair storage | Chairs stack vertically up to 8 units high | |
| Center umbrella compatibility | 40mm center hole accepts standard patio umbrella poles | |
| Adjustable leveling feet | Optional rotating glides compensate for uneven patio surfaces | |
| Knock-down assembly | Flat-packed design requires bolt-together assembly with included tools | |
| Easy surface cleaning | Smooth non-porous slat surfaces wipe clean with water-based cleaners | |
| Rust-resistant frame performance | E-coat primer under powder top coat prevents corrosion | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential backyard patio use | Suitable for family outdoor meals and gatherings on wooden or composite decks | |
|---|---|---|
| Garden and poolside dining | Weather-resistant construction withstands splashes, sun and regular rain exposure | |
| Restaurant outdoor seating | Durable easy-clean design works for casual cafe and bistro patio dining areas | |
| Balcony dining for large units | Scaled appropriately for spacious residential balconies with 6-person seating needs | |
| Hotel outdoor leisure areas | Stackable design simplifies reconfiguration and off-season storage for hospitality venues | |
| Recommended accessory pairing | Pairs with outdoor seat cushions and 2.7m center patio umbrella for added comfort |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture safety requirements for domestic and contract seating and tables | |
|---|---|---|
| EN 581-2:2019 | Mechanical safety and strength test methods for outdoor dining furniture |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable to frame structural integrity | |
|---|---|---|
| GB/T 28008-2011 | Safety requirements for outdoor leisure furniture, applicable to edge and stability performance | |
| GB/T 17657-2013 | Test methods for surface finish durability, applicable to powder coating abrasion resistance |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable to frame structural integrity; 2. GB/T 28008-2011: Safety requirements for outdoor leisure furniture, applicable to edge and stability performance; 3. GB/T 17657-2013: Test methods for surface finish durability, applicable to powder coating abrasion resistance; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
