Product supplier7-Piece Ornate Cast Aluminum Patio Dining Set, Cast aluminum alloy, fully welded joints
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2130 × 970 × 750 mm | |
|---|---|---|
| Overall set dimensions | 2130 x 970 x 750 mm | |
| Center umbrella hole diameter | 51 mm | |
| Chair seat dimensions | 500 x 470 mm | |
| Seat height from floor | 480 mm | |
| Chair backrest height | 460 mm | |
| Armrest height from seat | 180 mm | |
| Cushion thickness | 69 mm | |
| Table clearance under apron | 660 mm | |
| Chair leg spread width | 640 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total set net weight | 118 kg | |
|---|---|---|
| Weight capacity per chair | 159 kg | |
| Table top static load capacity | 75 kg | |
| Recommended number of users | 6 people | |
| Powder coating corrosion resistance | 5 years | |
| Cushion water drainage time | 2 hours | |
| Chair frame static load test rating | 200 kg | |
| Adjustable foot leveler adjustment range | 13 mm | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Table and chair frame construction | Cast aluminum alloy, fully welded joints | |
|---|---|---|
| Frame surface finish | Multi-stage antique bronze powder coating | |
| Table top construction | Cast aluminum with embossed decorative patterned inlay | |
| Table base construction | Double cast aluminum pedestal bases with carved scroll detailing | |
| Seat cushion core material | High-density quick-dry outdoor polyurethane foam | |
| Cushion upholstery fabric | Solution-dyed polyester outdoor fabric | |
| Chair armrest construction | Cast aluminum with scrolled curled end detailing | |
| Chair backrest construction | Cast aluminum frame with decorative lattice lower panel | |
| Foot glides | Non-marking nylon adjustable levelers | |
| Seam stitching pitch for cushions | 8 stitches per 25 mm | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Umbrella hole compatibility | Fits 50 mm diameter standard patio umbrellas | |
|---|---|---|
| Leveling adjustment | Threaded nylon foot glides adjust for uneven surfaces | |
| Cushion attachment system | Velcro strips secure cushions to chair seat frames | |
| Water drainage design | Perforated chair back lattice drains rainwater quickly | |
| Chair tuck design | Chairs slide fully under table apron when not in use | |
| Weather resistance function | Rust-proof frames and water-shedding cushions support year-round outdoor use | |
| Seat support structure | Cast aluminum seat pan distributes weight evenly across cushion | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential patio use | Suitable for backyard, garden, deck or poolside 6-person dining | |
|---|---|---|
| Hospitality outdoor use | Applicable for restaurant sidewalk seating, hotel terrace dining areas | |
| Small event use | Supports small outdoor gatherings, family meals and casual entertaining | |
| Climate suitability | Recommended for use in temperate, subtropical and coastal environments | |
| Style matching | Complements traditional, Mediterranean, or Tuscan outdoor decor schemes | |
| Surface requirement | Performs best on flat concrete, stone paver or wooden deck surfaces |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture seating and table safety requirements, general applicable standard | |
|---|---|---|
| EN 581-2:2019 | Mechanical safety requirements for outdoor seating, applicable to chair load testing | |
| EN 581-3:2017 | Mechanical safety requirements for outdoor tables, applicable to table stability testing |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture, applicable to frame strength verification | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances for indoor furniture, reference for coating material testing | |
| GB/T 24536-2009 | Performance requirements for outdoor furniture, applicable to weather durability testing |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture, applicable to frame strength verification; 2. GB 18584-2001: Limit of harmful substances for indoor furniture, reference for coating material testing; 3. GB/T 24536-2009: Performance requirements for outdoor furniture, applicable to weather durability testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool