| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (table + 4 arranged chairs) | 1980 x 1980 x 729 mm | |
|---|---|---|
| Table overall dimensions | 1067 mm diameter x 729 mm height | |
| Center umbrella hole diameter | 40 mm | |
| Lower circular support shelf diameter | 530 mm | |
| Chair overall dimensions per unit | 570 mm wide x 640 mm deep x 991 mm high | |
| Chair seat height (floor to seat surface) | 432 mm | |
| Chair seat dimensions | 495 mm wide x 457 mm deep | |
| Chair backrest height (seat to top of back) | 508 mm | |
| Chair armrest height (floor to arm top) | 635 mm | |
| Table apron clearance (floor to table apron bottom) | 676 mm | |
| Metal slat width (table and chair surfaces) | 32 mm | |
| Table leg spread diameter at floor contact | 914 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Per-chair static weight capacity | 136 kg | |
|---|---|---|
| Table top distributed static load capacity | 68 kg | |
| Set total net weight (all components) | 39 kg | |
| Seating capacity | 4 adults | |
| Stacked chair storage height (4 chairs nested) | 1120 mm | |
| Coating UV fade resistance lifespan | 2 years | |
| Warranty period | 1 year | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table and chair frame structure | 1.2 mm thick tubular steel with E-coat underlayer | |
|---|---|---|
| Exterior surface finish | Matte black weather-resistant polyester powder coating | |
| Tabletop construction | Horizontal 32mm wide steel slats with 5mm drainage gaps | |
| Chair seat and back construction | Horizontal steel slats welded to tubular frame | |
| Integrated chair armrests | Curved 22mm diameter tubular steel matching frame finish | |
| Lower table support shelf | Circular steel ring with cross-braced metal supports | |
| Chair foot pads | Non-slip polyethylene glides fitted to leg ends | |
| Umbrella hole fitting | Steel-rimmed opening with plastic insert ring | |
| Assembly hardware | Zinc-plated steel bolts, nuts and washers with hex key | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Center umbrella mounting | Accommodates standard 38mm diameter patio parasol poles with lower pole brace | |
|---|---|---|
| Chair stackable storage | Nests vertically up to 4 chairs for off-season space saving | |
| Slatted surface drainage | Open gaps between slats allow rainwater runoff without pooling | |
| Leveling adjustment | Replaceable foot glides compensate for slight uneven patio surfaces | |
| Knock-down assembly | Single-person assembly with included hardware and instruction manual | |
| Weather resistance performance | Multi-layer coating resists rust, rain exposure and UV fading for outdoor use | |
| Surface cleaning | Smooth powder-coated surface wipes clean with standard household outdoor cleaners | |
| Weighted umbrella base compatibility | Clear floor space under table accommodates 450mm diameter cast iron bases | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio/deck installation | Sized for small 4-person casual dining on home exterior paved surfaces | |
|---|---|---|
| Balcony outdoor use | Stackable storage supports use on small apartment balconies when not in use | |
| Garden and poolside placement | Weather-coated metal construction resists moisture and pool chemical exposure | |
| Casual outdoor dining and coffee service | Table height optimized for standard dining ware and beverage use | |
| Small commercial outdoor seating | Durable steel construction suitable for cafe or bistro exterior patio seating | |
| Umbrella-compatible shaded seating | Integrated umbrella hole supports adding a parasol for sun protection during daytime use |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
