| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall table dimensions | 940 x 940 x 760 mm | |
|---|---|---|
| Table leg cross-section | 50 x 50 mm | |
| Center umbrella hole diameter | 50 mm | |
| Individual chair overall dimensions | 645 x 640 x 890 mm | |
| Chair seat height | 432 mm | |
| Chair seat dimensions | 485 x 460 mm | |
| Chair back height above seat | 508 mm | |
| Chair armrest height above seat | 213 mm | |
| Individual slat width | 45 mm | |
| Slat gap width | 10 mm | |
| Table underside knee clearance | 680 mm | |
| Chair leg footprint spread | 560 x 580 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Table static load capacity | 150 kg | |
|---|---|---|
| Total set net weight | 48 kg | |
| Seating capacity | 4 people | |
| Chair stack height for storage | 8 units | |
| Frame coating salt spray resistance | 500 hours | |
| Recommended service temperature range | -20 to 60 °C | |
| Slat surface UV fade resistance warranty period | 1 year | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table and chair frame | 1.2mm thick powder-coated black steel | |
|---|---|---|
| Tabletop, seat and back slats | HDPE faux teak wood-look composite | |
| Armrest pads | Matching HDPE wood-look composite | |
| Frame surface finish | Matte black polyester powder coating | |
| Table leg feet | Injection-molded PP plastic glides | |
| Assembly hardware | Zinc-plated steel bolts and nuts | |
| Umbrella hole insert | Polypropylene plastic cap | |
| Slat fasteners | Stainless steel screws | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Center table umbrella hole | Accommodates 50mm diameter patio umbrellas | |
|---|---|---|
| Slatted surface drainage | 10mm gaps between all slats | |
| Chair arm support | Curved steel frame with composite pad | |
| Chair stackability | Chairs stack vertically to 8 units high | |
| Leveling adjustment | Fixed non-adjustable plastic glides | |
| Cleaning requirement | Wipe with damp cloth and mild soap | |
| Assembly requirement | Knock-down assembly with included hex key | |
| Surface compatibility | Suitable for concrete, stone, tile and wood deck surfaces | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential patio use | Suitable for backyards, balconies and garden dining areas | |
|---|---|---|
| Commercial cafe outdoor seating | Durable construction for sidewalk cafe and bistro patios | |
| Hotel terrace furnishing | Weather-resistant design for poolside and terrace guest seating | |
| Rooftop lounge installation | Lightweight yet stable for elevated outdoor decks | |
| Balcony small-space dining | Compact 940mm square footprint fits small residential balconies | |
| All-season outdoor use | Rust-resistant frame and UV-stable slats hold up to sun and rain |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
