| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Table overall dimensions | 760 x 760 x 760 mm | |
|---|---|---|
| Tabletop diameter | 760 mm | |
| Table central column diameter | 76 mm | |
| Table cross base spread | 660 mm | |
| Table foot leveler height adjustment | 10 mm | |
| Chair overall dimensions | 530 x 510 x 880 mm | |
| Chair seat height | 460 mm | |
| Chair seat dimensions | 380 x 380 mm | |
| Chair backrest height above seat | 420 mm | |
| Chair armrest height above seat | 180 mm | |
| Chair leg taper thickness at foot | 20 mm | |
| Clearance under table for knee space | 660 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Total set net weight | 54 kg | |
|---|---|---|
| Per-chair static load capacity | 150 kg | |
| Seating capacity | 4 persons | |
| Maximum chair stack height | 8 chairs | |
| Weather resistance rating | Indoor/outdoor UV and water resistant | |
| Limited warranty period | 1 year | |
| Available color variants | 5 | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop construction | 1.2mm thick powder-coated solid steel | |
|---|---|---|
| Table pedestal column | 1.5mm thick welded steel tubing | |
| Table cross base frame | 2.0mm thick welded steel plate | |
| Chair frame construction | 1.2mm thick cold-rolled steel | |
| Surface finish | Matte black scratch-resistant polyester powder coat | |
| Floor protection glides | Hard nylon/rubber non-marring feet | |
| Adjustable levelers | Nylon-tipped steel thread inserts | |
| Seat and back panel | 1.0mm thick stamped steel | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Chair stackable storage | Chairs nest vertically for compact storage | |
|---|---|---|
| Table level adjustment | Threaded foot levelers compensate for uneven floors | |
| Wipe-clean surface maintenance | Smooth non-porous metal surfaces require only damp cloth cleaning | |
| Indoor/outdoor placement | Weather-resistant coating prevents rust and UV fading | |
| Table base stability design | 4-prong cross base eliminates leg obstruction around table | |
| Chair structural bracing | Welded horizontal cross bars under seat prevent frame flex | |
| Tool-free chair storage | No disassembly required for stacking chairs | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Largest carton dimensions | 800 x 800 x 100 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential balcony or small patio use | Compact 760mm diameter footprint fits tight outdoor spaces | |
|---|---|---|
| Commercial cafe or bistro seating | Durable steel construction and stackable design suit high-traffic venues | |
| Break room or casual office seating | Wipe-clean metal surface resists spills and daily wear | |
| Rooftop bar or beer garden use | Weather-resistant finish withstands outdoor sun and rain exposure | |
| Pop-up event or catering seating | Stackable chairs enable fast setup and compact transport between venues | |
| Studio apartment small dining area | Minimal industrial profile fits compact urban living spaces |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture seating and table safety requirements for residential use | |
|---|---|---|
| EN 581-2:2019 | Mechanical safety and strength test methods for outdoor seating | |
| EN 581-3:2017 | Mechanical safety and strength test methods for outdoor tables |
Standards applicable to China-market projects
| GB 28007-2011 | Applicable for children's furniture safety if used in family spaces | |
|---|---|---|
| GB/T 3324-2017 | General technical requirements for metal furniture performance testing | |
| GB/T 19995.1-2005 | Outdoor furniture metal material environmental adaptability requirements |
This product must meet the following technical requirements: 1. GB 28007-2011: Applicable for children's furniture safety if used in family spaces; 2. GB/T 3324-2017: General technical requirements for metal furniture performance testing; 3. GB/T 19995.1-2005: Outdoor furniture metal material environmental adaptability requirements; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
