| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint | 2200 x 2200 mm | |
|---|---|---|
| Table top dimensions | 940 x 940 x 750 mm | |
| Table top edge thickness | 25 mm | |
| Table base spread | 690 mm | |
| Individual chair dimensions | 635 x 584 x 889 mm | |
| Chair seat height | 457 mm | |
| Chair seat dimensions | 495 x 495 mm | |
| Chair back height | 432 mm | |
| Chair armrest height above seat | 178 mm | |
| Chair leg tube diameter | 25 mm | |
| Knee clearance under table | 660 mm | |
| Table leg floor contact diameter | 30 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Per-chair static load capacity | 159 kg | |
|---|---|---|
| Set total assembled weight | 73 kg | |
| Seating capacity | 4 adults | |
| Frame rust resistance service life | 3 years | |
| Wicker UV fade resistance | 500 hours | |
| Chair stackable storage height | 8 units high | |
| Floor glide load rating per foot | 40 kg | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Table top | Black powder-coated laminated steel sheet | |
|---|---|---|
| Table frame and legs | E-coated and powder-coated carbon steel tubing | |
| Chair frame core | 1.2mm thick powder-coated tubular steel | |
| Chair seat and back weaves | Gray UV-stabilized PE synthetic rattan | |
| Chair armrest and leg finish wrap | Brown PE rattan-look coating | |
| Chair joint accents | Black woven PE rattan binding | |
| Floor glides | Non-marking molded rubber | |
| Table base bracing | Powder-coated steel cross bars | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
Adjustment / rotation / tilt / mobility / storage features
| Table cross-brace stability system | Four-point welded cross bracing connects legs to reduce lateral wobble during outdoor use | |
|---|---|---|
| Chair non-folding fixed frame design | Permanent fixed joint construction for rigid seating support during regular dining use | |
| Chair vertical stack storage | Chairs nest vertically when not in use to reduce storage footprint by 75% | |
| All-weather material performance | Rattan and powder-coated metal resist rain, UV exposure, and light frost for outdoor placement | |
| Floor protection feature | Rubber glides on all leg ends prevent scratches to stone, tile, decking, and artificial turf | |
| Seating ergonomic support | Curved fan back and integrated armrests provide upright support for 2+ hour dining sessions | |
| Table surface maintenance | Smooth non-porous top wipes clean with damp cloth for quick spill removal | |
| Weight distribution design | Splayed legs spread table and seated weight evenly to prevent sinking on soft turf | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential patio and garden use | Suits backyards, poolside, and lawn areas for everyday family outdoor dining | |
|---|---|---|
| Commercial café and bistro seating | Durable weather-resistant construction for high-turnover outdoor restaurant seating | |
| Balcony and terrace placement | Compact 940mm square footprint fits small urban outdoor living spaces | |
| Waterside and resort outdoor areas | Rust-resistant frame holds up to humidity near pools, ponds, and coastal locations | |
| Temporary event seating | Stackable chairs enable quick setup and teardown for outdoor parties and events | |
| All-season outdoor placement | UV and moisture-resistant materials eliminate need for daily storage in mild climates | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 581-1:2017 | Outdoor furniture seating and table safety requirements for residential use | |
|---|---|---|
| EN 581-2:2019 | Mechanical safety requirements for outdoor seating including static load and stability | |
| EN 581-3:2019 | Mechanical safety requirements for outdoor dining tables including load capacity |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for metal furniture applicable to outdoor table structural safety | |
|---|---|---|
| GB/T 28007-2011 | Outdoor furniture general safety performance requirements applicable to full set construction | |
| GB 18584-2001 | Indoor decoration material furniture limit of harmful substances applicable to coating safety |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for metal furniture applicable to outdoor table structural safety; 2. GB/T 28007-2011: Outdoor furniture general safety performance requirements applicable to full set construction; 3. GB 18584-2001: Indoor decoration material furniture limit of harmful substances applicable to coating safety; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
