| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 400 x 350 x 600 mm | |
|---|---|---|
| Tabletop diameter | 350 mm | |
| Tabletop thickness | 5 mm | |
| Vertical support pole diameter | 25 mm | |
| Sled base prong length | 400 mm | |
| Under-base clearance height | 30 mm | |
| Under-table knee/object clearance | 570 mm | |
| Support offset from tabletop center | 120 mm | |
| Sled base foot pad diameter | 12 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 25 kg | |
|---|---|---|
| Net product weight | 8 kg | |
| Finish scratch resistance | 3000 abrasion cycles | |
| Expected service life | 5 years | |
| Stability tilt angle threshold | 12 degrees | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat | |
| Upholstery Seam Pitch | 4 mm | |
| Recommended Procurement Warranty | Frame 10 years; filling 3 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | 5mm thick carbon steel with matte white powder coat | |
|---|---|---|
| Vertical support pole | 25mm diameter carbon steel tube with baked white paint finish | |
| Sled base prongs | 16mm diameter bent carbon steel tube with matching white finish | |
| Floor contact pads | Non-marking TPE anti-slip pads | |
| Surface finish | Matte white textured powder coating | |
| Weld joints | Ground and powder-coated seamless welds | |
| Metal wall thickness | 1.5 mm | |
| Wear layer | 40 micron powder coat thickness | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg | |
| Reference Upholstery Color Count | Recommended 8fabric/leather color options |
Adjustment / rotation / tilt / mobility / storage features
| Slide-under design | Two-prong sled base fits under sofas with 30mm+ ground clearance | |
|---|---|---|
| Surface utility | Round flat tabletop holds drinks, small devices, or reading materials | |
| Floor protection | Non-slip foot pads prevent scratches on hard flooring and reduce sliding | |
| Placement flexibility | Freestanding design works next to sofas, beds, or lounge seating | |
| Stability design | Offset sled base weight distribution prevents tipping under rated load | |
| Water resistance | Sealed powder-coated surfaces resist spills and allow easy wipe cleaning | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Lounge area placement | Position next to upholstered booths or sofas for over-seat access | |
|---|---|---|
| Residential living room use | Serves as a small end table for drinks, remotes, or mobile devices | |
| Bedroom bedside use | Slides under bed frames for use as an over-bed laptop or snack table | |
| Office breakout space use | Pairs with modular lounge seating in casual collaborative areas | |
| Small space deployment | Ideal for studio apartments or compact seating areas with limited side space | |
| Commercial waiting area use | Used next to guest seating for holding beverages or reading materials |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
