| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 430 x 430 x 610 mm | |
|---|---|---|
| Tabletop diameter | 430 mm | |
| Tabletop thickness | 20 mm | |
| Base contact diameter | 380 mm | |
| Midsection narrowest diameter | 220 mm | |
| Upper pedestal frustum height | 190 mm | |
| Central diamond pedestal height | 210 mm | |
| Lower pedestal frustum height | 190 mm | |
| Undertable clearance height | 10 mm | |
| Facet edge width | 25 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 200 kg | |
|---|---|---|
| Net product weight | 14 kg | |
| Surface scratch resistance rating | 2H pencil hardness | |
| Tip stability angle | 15 degrees | |
| Surface spill resistance | Non-absorbent sealed finish | |
| Service life expectation | 5 years | |
| Warranty period | 1 year | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | High-gloss black lacquered fiberstone composite | |
|---|---|---|
| Pedestal core | Reinforced polystone composite | |
| Surface finish coating | UV-cured high-gloss black lacquer | |
| Base contact pad | Felt floor protection pads | |
| Finish thickness | 0.8 mm | |
| Facet edges | Sanded and polished seamless joints | |
| Internal reinforcement | Fiberglass mesh core reinforcement | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Assembly requirement | Fully assembled, zero tools required for placement | |
|---|---|---|
| Placement use | Stationary accent surface for small decor, beverages, or table lamps | |
| Floor protection | Pre-applied felt pads prevent scuffs on hard flooring | |
| Surface maintenance | Wipe clean with soft damp cloth, no abrasive cleaners | |
| Mobility | Lightweight single-piece design allows repositioning by one adult | |
| Load distribution | Central pedestal evenly distributes top load to full base contact area | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential living room use | Placement beside sofas or armchairs for beverages and decor | |
|---|---|---|
| Bedroom accent use | Position next to beds as a decorative nightstand alternative | |
| Commercial lounge use | Use in hotel lobbies, office breakout areas, or waiting spaces | |
| Contemporary interior styling | Pairs with minimalist, modern, or glam decor schemes | |
| Corner space utilization | Small diameter suits tight corners or narrow unused floor space |
EU Market Access Requirements* EN Standards
| Furniture stability recommendation | EN 15372:2016 | |
|---|---|---|
| Surface finish recommendation | EN 12720:2013 |
Standards applicable to China-market projects
| Formaldehyde emission recommendation | GB/T 18580E1 grade | |
|---|---|---|
| Surface durability recommendation | GB/T 4893.4 grade 2 adhesion |
This product must meet the following technical requirements: 1. Formaldehyde emission recommendation: GB/T 18580E1 grade; 2. Surface durability recommendation: GB/T 4893.4 grade 2 adhesion; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
