Product supplier2-Piece Hammered Black Pedestal Round Nesting Side Table Set, 12mm polished sintered stone, grey marble-look finish, non-porous surface
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 500 × 500 × 610 mm | |
|---|---|---|
| Overall set dimensions (taller table) | 500 x 500 x 610 mm | |
| Shorter table dimensions | 500 x 500 x 510 mm | |
| Tabletop thickness | 12 mm | |
| Taller table pedestal stem diameter | 50 mm | |
| Taller table base footprint diameter | 350 mm | |
| Shorter table base footprint diameter | 320 mm | |
| Nesting overlap depth | 300 mm | |
| Floor clearance under tabletop | 598 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Per-table static load capacity | 100 kg | |
|---|---|---|
| Total set net weight | 16 kg | |
| Tabletop surface scratch resistance | Grade 3 (1500 revolutions) | |
| Base floor contact static stability | 15 degree tilt without tipping | |
| Tabletop heat resistance | 180 °C | |
| Surface water resistance rating | IPX4 | |
| Limited warranty period | 1 year | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop | 12mm polished sintered stone, grey marble-look finish, non-porous surface | |
|---|---|---|
| Pedestal stem | 2mm thick carbon steel tube, matte black powder coat | |
| Base weight | 2.5mm thick hammered carbon steel, textured hand-beaten black finish | |
| Tabletop-to-base connection | Steel mounting plate with M8 threaded hardware, welded to stem | |
| Floor contact pads | 3mm thick non-slip EVA rubber pads, affixed to base bottom | |
| Surface coating on metal parts | 80μm thick matte black powder coating, rust-resistant for indoor use | |
| Tabletop edge finish | 1mm radius polished eased edge, no raised lip | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Nesting storage function | Shorter table slides partially under taller table to reduce footprint when not in use | |
|---|---|---|
| Floor protection function | EVA rubber pads prevent scuffs and scratches on hard flooring and carpet | |
| Cleaning requirement | Wipe clean with soft damp cloth, no abrasive cleaners required | |
| Assembly requirement | 3-point screw connection between tabletop and base with included hex key | |
| Weight distribution design | Low center of gravity from weighted flared base prevents tipping when loaded | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Bedroom nightstand alternative | Use as paired bedside tables for modern or industrial style bedrooms | |
|---|---|---|
| Lounge and reception accent use | Place in office reception areas or lounge spaces for guest beverage placement | |
| Small space flexible arrangement | Suitable for studio apartments where nesting function saves floor space when not in use | |
| Balcony casual seating area | Use on covered indoor balconies paired with small accent chairs for drinks and reading materials |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
No standards data is available for this market.
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool