| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 500 x 400 x 730 mm | |
|---|---|---|
| Tabletop dimensions | 500 x 400 mm | |
| Tabletop thickness | 25 mm | |
| Minimum table height | 530 mm | |
| Maximum table height | 730 mm | |
| Height adjustment stroke | 200 mm | |
| Carry handle dimensions | 100 x 25 mm | |
| Support column diameter | 50 mm | |
| Base foot length | 450 mm | |
| Base foot width | 60 mm | |
| Under-base clearance | 10 mm | |
| Tabletop corner radius | 30 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Net product weight | 5 kg | |
|---|---|---|
| Tabletop static load capacity | 20 kg | |
| Base stability load | 15 kg | |
| Height adjustment positions | 5 | |
| Surface scratch resistance | 2000 cycles | |
| Warranty period | 12 months | |
| Available color count | 2 | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop | Powder-coated 1.5mm thick steel sheet | |
|---|---|---|
| Support column | Powder-coated 1.5mm thick round steel tube | |
| T-base feet | Powder-coated 2mm thick flat steel bar | |
| Carry handle cutout | Deburred rounded steel edge | |
| Height adjustment mechanism | Zinc-plated steel pin lock | |
| Surface finish | Textured matte polyester powder coat | |
| Column joint welds | Ground smooth powder-coated finish | |
| Base foot bottoms | Non-marking 1mm thick PE pads | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Height adjustment | Pin-lock manual adjustment with 5 positions | |
|---|---|---|
| Cantilever base fit | Flat T-base slides under sofas, beds and armchairs | |
| Integrated carry handle | Cutout handle in tabletop corner | |
| Surface use | Flat fixed non-tilting tabletop | |
| Floor protection | Non-slip non-marking foot pads | |
| Tool-free adjustment | Spring-loaded adjustment pin | |
| Compact storage | Narrow T-base footprint | |
| Edge design | Fully rounded tabletop edges | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Living room use | Slides under sofa armrests for laptop work, snacks or remote controls | |
|---|---|---|
| Bedroom bedside use | Fits under bed frames for overnight device charging, reading or medication access | |
| Home office flexible use | Moves between workstations for extra temporary device or document space | |
| Small space living | Lightweight portable design for studio apartments and dorm rooms | |
| Care facility use | Adjustable height for overbed patient dining or device access | |
| Hospitality lounge use | Matches soft seating in hotel lobbies and co-working lounges | |
| Event temporary use | Quick setup and light weight for pop-up events or trade show seating |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
