| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 400 x 400 x 450 mm | |
|---|---|---|
| Tabletop diameter | 400 mm | |
| Tabletop lip height | 20 mm | |
| Central narrow neck diameter | 120 mm | |
| Base floor contact diameter | 320 mm | |
| Underside floor clearance | 0 mm | |
| Tabletop surface depth (concave dished area) | 15 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Net weight | 15 kg | |
|---|---|---|
| Static top load capacity | 75 kg | |
| Surface scratch resistance (finish) | 2H pencil hardness | |
| Recommended maximum even load for tabletop use | 15 kg | |
| Stability tilt angle before tipping | 15 degrees | |
| Warranty period | 1 year | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
| Core structural material | Cast fiberglass-reinforced composite | |
|---|---|---|
| Surface finish | High-gloss UV-cured yellow lacquer | |
| Tabletop edge treatment | Rounded polished seamless edge | |
| Base bottom contact layer | 3mm thick non-slip felt glides | |
| Neck connection structure | Integral monolithic joint, no separate hardware | |
| Finish coating thickness | 0.8mm | |
| Surface cleaning compatibility | Wipe-clean with damp soft cloth | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel | |
| Five-star Base Material Thickness | Metal base wall 3.5 mm; diameter 700 mm |
Adjustment / rotation / tilt / mobility / storage features
| Assembly requirement | Fully assembled, no on-site installation needed | |
|---|---|---|
| Dual-use functionality | Serves as accent side table or occasional lightweight seating | |
| Tabletop item retention | Shallow concave tray with raised lip prevents small items from sliding off | |
| Mobility | Lightweight enough for single-person repositioning between rooms | |
| Floor protection | Felt base glides prevent scratches on hard flooring and rug snags | |
| Weather resistance (indoor primary use) | Suitable for covered indoor use only; not rated for constant outdoor exposure | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Living room end table use | Place beside sofas or lounge chairs to hold drinks, remotes, or small decor | |
|---|---|---|
| Bedside accent table use | Position next to beds for table lamps, phones, or nighttime reading materials | |
| Entryway focal piece | Use as a sculptural accent in foyers to hold keys or small decorative objects | |
| Occasional guest seating | Use as extra temporary seating for small gatherings in residential spaces | |
| Office lounge accessory | Deploy in break areas or casual collaboration zones to hold beverages or laptops | |
| Balcony covered outdoor use | Place in screened or covered patios for decorative plant or drink placement | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic tables, applicable for load and stability testing | |
|---|---|---|
| EN 15372:2016 | Furniture - Durability of surfaces, applicable for gloss finish abrasion and stain resistance assessment |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for finish adhesion and structural stability checks | |
|---|---|---|
| GB 18584-2001 | Indoor decorating materials - limit of harmful substances in wooden furniture, for formaldehyde/VOC emission verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for finish adhesion and structural stability checks; 2. GB 18584-2001: Indoor decorating materials - limit of harmful substances in wooden furniture, for formaldehyde/VOC emission verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
