Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	800 × 800 × 460 mm
Set overall footprint (arranged as shown)	1200 x 800 x 460 mm
Large table top diameter	800 mm
Large table overall height	460 mm
Large table tray lip height	20 mm
Large table top thickness	15 mm
Small table top diameter	600 mm
Small table overall height	430 mm
Small table tray lip height	18 mm
Under-table floor clearance (large table)	430 mm
Leg outer spread at floor (large table)	720 mm
Leg tube section	25 x 15 mm rectangular steel tube
Leg wall thickness	0.8 mm
Nesting gap between tables	100 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Large table static distributed load capacity	100 kg
Total set net weight	16 kg
Frame finish abrasion resistance	Grade 2, 3000 cycles
Top surface heat resistance	120 °C
Leg floor load distribution per foot	25 kg
Adjustable foot pad height adjustment	10 mm
Recommended static seating-side usage clearance	300 mm
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Large table tray top	1.2mm thick stamped steel with matte black powder-coated finish
Small table tray top	1.2mm thick stamped steel with brushed copper powder-coated finish
Leg frames	Rectangular steel tube with matte black powder-coat finish
Under-top cross bracing	1.2mm thick flat steel cross supports welded to leg brackets
Floor contact pads	Injection-molded non-scratch TPE plastic pads at each leg foot
Connector hardware	Zinc-plated steel M6 bolts and lock nuts for leg-to-top attachment
Surface finish coating thickness (frame)	60 micron epoxy-polyester powder coat
Top edge rolled lip	Folded steel rim forming 20mm raised tray edge to contain items
Weld points	Ground and smoothed weld joints at leg-to-brace connections
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Nested storage configuration	Small table slides completely under large table to save floor space when not in use
Tray top containment	Raised perimeter lip prevents small items, drinks or decor from sliding off the table edge
Fixed non-folding structure	All leg and brace connections are rigid once assembled, no folding or tilt mechanisms
Level adjustment	Individual TPE foot pads rotate to adjust leg length and correct for uneven floor surfaces
Independent use capability	Both tables function as separate standalone accent tables when pulled apart
Floor protection	Soft non-marking foot pads prevent scratches on hard flooring and reduce sliding
Easy-clean surface	Smooth powder-coated metal surfaces wipe clean with a soft damp cloth, no porous material exposure
Knockdown assembly	Legs attach to underside top brackets with included hardware, no permanent welding required for end user
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential living room placement	Positioned in front of sofas or sectionals for placing drinks, books and decor items
Small space apartment use	Nested design reduces footprint when extra surface area is not required
Lounge and waiting area placement	Used in office breakouts, hotel lobbies or casual waiting spaces for guest convenience
Flexible side table use	Small table pulled out for use next to armchairs or as a temporary side surface
Modern industrial interior schemes	Black metal and copper finish complements industrial, minimalist and contemporary decor
Rental property furnishing	Lightweight, easy to assemble and durable set suitable for short-term rental and staged properties

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521:2015 Furniture - Strength, durability and safety for domestic tables	Applicable European performance standard for residential coffee table structural requirements
EN 1022:2005 Furniture - Seating - Determination of stability	Reference stability standard for low freestanding table units to prevent tipping

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017 General technical requirements for wooden furniture	Applicable as dimensional and structural tolerance reference for general household tables
GB/T 4893.8-2013 Furniture surface test - Wear resistance	Recommended acceptance standard for powder-coated metal surface durability
GB/T 10357.1-1989 Furniture mechanical test - Table static load	Recommended test standard for verifying table top load capacity

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017 General technical requirements for wooden furniture: Applicable as dimensional and structural tolerance reference for general household tables;
2. GB/T 4893.8-2013 Furniture surface test - Wear resistance: Recommended acceptance standard for powder-coated metal surface durability;
3. GB/T 10357.1-1989 Furniture mechanical test - Table static load: Recommended test standard for verifying table top load capacity;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · CT-NEST-RND-TRAY-02

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · CT-NEST-RND-TRAY-02

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · CT-NEST-RND-TRAY-02Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Nested Pair Round Tray-Top Coffee Table Set, model CT-NEST-RND-TRAY-02, delivers a modern industrial aesthetic through a coordinated two-piece design anchored by contrasting metal finishes. When arranged in the displayed nested configuration, the set occupies a footprint of 1200 x 800 x 460 mm, with the smaller table tucking fully beneath the larger one to reduce occupied floor space when additional surface area is not required. The larger table features an 800 mm diameter matte black stamped steel tray top set at 460 mm in height, while the smaller table offers a 600 mm diameter brushed copper powder-coated tray top at 430 mm in height. Both tops include raised folded steel rims, with a 20 mm lip on the larger table and 18 mm lip on the smaller table, creating a defined tray edge to contain placed items. Constructed for durable long-term use, the set features angled, splayed legs made from rectangular steel tube with a 60 micron matte black epoxy-polyester powder coat finish, supported by 1.2mm thick flat steel cross bracing welded to leg brackets with smoothed, ground weld joints. Legs attach to tops via zinc-plated steel M6 bolts and lock nuts for a rigid, fixed non-folding structure with no tilt or fold mechanisms. Each leg terminates in an injection-molded non-scratch TPE foot pad, which rotates to offer 10 mm of height adjustment to correct for uneven floors, prevent scratches on hard surfaces, and reduce unwanted sliding. The frame finish delivers Grade 2 abrasion resistance across 3000 cycles, while top surfaces withstand heat up to 120 °C and wipe clean easily with a soft damp cloth, as no porous materials are exposed. The large table supports 100 kg of static distributed load, with each leg foot distributing 25 kg of load to flooring, and the total net weight of the set is 16 kg. Functionally, the set balances flexible use and space efficiency: the two tables may be pulled apart for use as independent standalone accent tables, with the smaller piece serving as a temporary side surface next to armchairs, or nested together to minimize footprint. The raised tray lips prevent drinks, small items, and decor from sliding off edges, while the durable metal construction stands up to regular high-traffic use. The set suits a wide range of spaces, including residential living rooms positioned in front of sofas or sectionals, small-space apartments, office breakout areas, hotel lobbies, casual waiting zones, and short-term rental or staged properties, where its black and copper finish complements industrial, minimalist, and contemporary interior schemes. For procurement, note that each set ships in 2 cartons with a total packaged gross weight of 90 kg and a packaging volume of 0.55 m³, requires 40 minutes of assembly time per set, and requires a 300 mm clearance along seating sides for comfortable use. The product is offered as an unbranded piece with no additional proprietary branding elements.

Nested Pair Round Tray-Top Coffee Table Set Specifications

Suppliers and stock