Product supplierRound Marble-Pattern C-Shaped Slide-Under Side End Table, 15mm high-density fiberboard with marble-pattern laminate
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 470 × 470 × 690 mm | |
|---|---|---|
| Round tabletop diameter | 470 mm | |
| Tabletop thickness | 15 mm | |
| Central support bar width | 60 mm | |
| Central support bar thickness | 8 mm | |
| Ring base outer diameter | 320 mm | |
| Ring base inner cutout diameter | 180 mm | |
| Base thickness | 6 mm | |
| Underside ground clearance to support underside | 30 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Product net weight | 10 kg | |
|---|---|---|
| Static tabletop load capacity | 23 kg | |
| Frame joint static load rating | 30 kg | |
| Surface scratch resistance | 2000 abrasion cycles | |
| Recommended maximum item weight on surface | 15 kg | |
| Leveling adjustment range | 3 mm | |
| Product warranty | 1 year | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop substrate | 15mm high-density fiberboard with marble-pattern laminate | |
|---|---|---|
| Tabletop edge banding | 1mm matte black PVC edge trim | |
| Central support structure | 8mm thick flat cold-rolled steel bar, matte black powder-coated | |
| Ring base | 6mm thick flat cold-rolled steel ring, matte black powder-coated | |
| Frame joints | TIG-welded steel connections between support and base | |
| Floor contact glides | 3mm thick non-marking PE plastic glides affixed to base underside | |
| Surface finish on metal parts | 80 micron matte black polyester powder coat | |
| Tabletop laminate finish | Low-gloss marble-pattern heat-sealed laminate | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Slide-under cantilever design | Hollow ring base slides under sofa/chair frames to position tabletop over seat edges | |
|---|---|---|
| Surface use compatibility | Supports drinks, snacks, small laptops, books, and table lamps up to rated capacity | |
| Floor protection | Fixed non-marking glides prevent scuffing on hardwood, tile, and laminate floors | |
| Assembly requirement | Knock-down assembly with included hex key and hardware; no specialized tools required | |
| Cleaning requirement | Wipe clean with damp soft cloth; avoid abrasive cleaners on laminate surface | |
| Placement versatility | Usable as sofa side table, chairside end table, bedside nightstand, or laptop snack table | |
| Stability design | Offset weighted ring base counterbalances cantilevered tabletop to resist tipping | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Living room sofa side placement | Position next to sofas and armchairs with base slid under frame to hold drinks and devices | |
|---|---|---|
| Bedroom bedside use | Serves as compact nightstand for small bedrooms with narrow floor space | |
| Lounge and reception area accent use | Placed next to lounge seating in office waiting areas or hotel lobbies for guest convenience | |
| Small apartment space-saving use | Replaces larger side tables in compact urban living spaces with minimal floor footprint | |
| Balcony casual seating side use | Used alongside outdoor-indoor balcony lounge chairs for beverage placement |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
No standards data is available for this market.
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool