Polished Green Stone Round Pedestal Side Table with Chrome Center Column and Double Sphere Decorative Base (model ST-GRN-DBLSPH-600D-700H) is listed under Pedestal Side Table. Dimensions: 600 × 600 × 700 mm. Materials: Polished green natural marble, full bullnose rounded edge. Load capacity: 77 kg. Product Features: Modern,luxury,style,fixed,pedestal,structure,round,tabletop,stone,decorative,base. This page consolidates 6 groups of specifications and GB / EN standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | JUESHANGDA | Model | ST-GRN-DBLSPH-600D-700H |
| Overall dimensions (W × D × H) | 600 × 600 × 700 mm | Tabletop diameter | 600 mm |
| Tabletop thickness | 30 mm | Center support column diameter | 50 mm |
| Decorative sphere diameter (each) | 180 mm | Round flat base diameter | 360 mm |
| Base disc thickness | 20 mm | Under-table knee clearance height | 670 mm |
| Primary Component Thickness | 40 mm according to load-bearing role | Hardware / Moving-part Clearance | 5 mm operating clearance |
| Net weight | 25 kg | Maximum static tabletop load capacity | 77 kg |
| Stone surface gloss level | 90 GU | Stone thickness tolerance | ±1 mm |
| Recommended static floor load for placement | 150 kg/m² | Surface scratch resistance (sealed stone) | 3 H pencil hardness |
| Reference Static Load | 150 kg depending on category | Moving-part Durability Reference | Acceptance target 50000 cycles |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years | Tabletop | Polished green natural marble, full bullnose rounded edge |
| Center support column | Polished chrome-plated 304 stainless steel, seamless tubular construction | Decorative double spheres | Matching polished green natural marble, solid turned construction |
| Bottom base disc | Matching polished green natural marble, flat rounded edge low-profile disc | Stone sealer | Penetrating invisible stone sealer applied to all stone surfaces |
| Joint hardware | Concealed steel threaded inserts and mounting bolts between components | Surface finish on metal parts | Mirror polished chrome plating, 0.8mm plating thickness |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | Reference Finish / Color Count | Recommended 6finish options |
| Structural configuration | Fixed single-pedestal construction, no moving parts or adjustment mechanisms | Leveling adaptation | Hidden felt floor protection pads pre-applied to base underside |
| Tabletop use case | Flat level surface for holding drinks, books, small decorative objects and table lamps | Assembly requirement | Fully assembled delivery, no on-site assembly required for end users |
| Cleaning requirement | Wipe clean with soft damp cloth, avoid acidic or abrasive cleaning products | Placement stability | Low center of gravity from weighted stone base prevents tipping under normal use |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable | Reference Package Count | 1 set / 2 cartons |
| Reference Assembly Time | 40 minutes per set | Reference Packaging Volume | 0.8 m³/set |
| Reference Packaged Gross Weight | 120 kg/set | Bedroom placement | Use as a nightstand beside beds for table lamps, phones and personal items |
| Entryway placement | Place in entry foyers to hold keys, small decor and table lamps | Hospitality application | Suitable for boutique hotel guest rooms, lounge areas and lobby seating zones |
| Commercial lounge use | Deploy in office lounge areas, waiting rooms and high-end co-working spaces | Recommended pairing | Coordinate with upholstered seating in neutral, warm wood or dark tone interior schemes |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 600 × 600 × 700 mm | |
|---|---|---|
| Tabletop diameter | 600 mm | |
| Tabletop thickness | 30 mm | |
| Center support column diameter | 50 mm | |
| Decorative sphere diameter (each) | 180 mm | |
| Round flat base diameter | 360 mm | |
| Base disc thickness | 20 mm | |
| Under-table knee clearance height | 670 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net weight | 25 kg | |
|---|---|---|
| Maximum static tabletop load capacity | 77 kg | |
| Stone surface gloss level | 90 GU | |
| Stone thickness tolerance | ±1 mm | |
| Recommended static floor load for placement | 150 kg/m² | |
| Surface scratch resistance (sealed stone) | 3 H pencil hardness | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop | Polished green natural marble, full bullnose rounded edge | |
|---|---|---|
| Center support column | Polished chrome-plated 304 stainless steel, seamless tubular construction | |
| Decorative double spheres | Matching polished green natural marble, solid turned construction | |
| Bottom base disc | Matching polished green natural marble, flat rounded edge low-profile disc | |
| Stone sealer | Penetrating invisible stone sealer applied to all stone surfaces | |
| Joint hardware | Concealed steel threaded inserts and mounting bolts between components | |
| Surface finish on metal parts | Mirror polished chrome plating, 0.8mm plating thickness | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Structural configuration | Fixed single-pedestal construction, no moving parts or adjustment mechanisms | |
|---|---|---|
| Leveling adaptation | Hidden felt floor protection pads pre-applied to base underside | |
| Tabletop use case | Flat level surface for holding drinks, books, small decorative objects and table lamps | |
| Assembly requirement | Fully assembled delivery, no on-site assembly required for end users | |
| Cleaning requirement | Wipe clean with soft damp cloth, avoid acidic or abrasive cleaning products | |
| Placement stability | Low center of gravity from weighted stone base prevents tipping under normal use | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Bedroom placement | Use as a nightstand beside beds for table lamps, phones and personal items | |
|---|---|---|
| Entryway placement | Place in entry foyers to hold keys, small decor and table lamps | |
| Hospitality application | Suitable for boutique hotel guest rooms, lounge areas and lobby seating zones | |
| Commercial lounge use | Deploy in office lounge areas, waiting rooms and high-end co-working spaces | |
| Recommended pairing | Coordinate with upholstered seating in neutral, warm wood or dark tone interior schemes |
EU Market Access Requirements* EN Standards
| Furniture surface durability | EN 12720:2009+A1:2013 | |
|---|---|---|
| Table mechanical safety | EN 15372:2016 | |
| Stone surface slip resistance | EN 14231:2003 |
Standards applicable to China-market projects
| Stone furniture dimensional tolerance | GB/T 3324 | |
|---|---|---|
| Formaldehyde emission limit | GB 18584 | |
| Furniture mechanical stability | GB/T 10357.1 |
This product must meet the following technical requirements: 1. Stone furniture dimensional tolerance: GB/T 3324; 2. Formaldehyde emission limit: GB 18584; 3. Furniture mechanical stability: GB/T 10357.1; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp