| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 600 x 600 x 550 mm | |
|---|---|---|
| Tabletop diameter | 600 mm | |
| Tabletop thickness | 20 mm | |
| Base bottom diameter | 280 mm | |
| Base top connection diameter | 120 mm | |
| Underside floor clearance | 530 mm | |
| Base wall thickness | 1.5 mm | |
| Floor contact pad diameter | 30 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Net product weight | 7 kg | |
|---|---|---|
| Tabletop static load capacity | 50 kg | |
| Tabletop scratch resistance | Level 3, 2000 abrasion cycles | |
| Metal base rust protection rating | Grade 2, 48 hour salt spray resistance | |
| Base tip-over stability angle | 12 degrees | |
| Sealed tabletop water absorption rate | 0.5% | |
| Assembly cycle rating | 8 times | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | 20mm engineered sintered stone, polished sealed finish | |
|---|---|---|
| Tabletop edge | Smooth rounded polished edge, consistent 2mm radius | |
| Pedestal base | 1.5mm formed carbon steel, conical angled structure | |
| Brass finish variant | Brushed gold PVD plating on steel base, high gloss lacquer seal | |
| Gunmetal finish variant | Matte black gunmetal baked paint on steel base, scratch-resistant top coat | |
| Tabletop-base connection | Zinc-plated steel mounting plate, M8 hex bolt hardware | |
| Floor protection pads | 30mm diameter non-slip rubber pads, adhered to base bottom | |
| Tabletop backing | 12mm MDF reinforcing panel under stone top, to prevent cracking | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Assembly method | Knock-down assembly, tabletop attaches to base with 4 bolts, tools included | |
|---|---|---|
| Floor protection function | Rubber pads isolate metal base from hard floors, prevent scuffing and sliding | |
| Surface functionality | Sealed stone top resists water rings, heat from drinkware up to 120°C, and common stains | |
| Placement flexibility | Compact single-pedestal footprint fits sofa sides, bedroom corners, and entry nooks | |
| Finish selection | Two standard finish combinations: brass base with marbled stone top, gunmetal base with white stone top | |
| Stability design | Angled conical base widens toward floor to lower center of gravity, reduce tip risk | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Residential living room | Place beside sofas or lounge chairs to hold drinks, books, and small decor items | |
|---|---|---|
| Bedroom bedside use | Serve as compact nightstand for lamps, phones, and personal items in small bedrooms | |
| Commercial lounge areas | Deploy in hotel lobbies, office breakout zones, and cafe waiting areas for guest use | |
| Small space apartments | Fit in tight entryways or narrow reading nooks due to compact footprint | |
| Show home styling | Coordinate with modern light luxury interior schemes as sculptural accent furniture | |
| Bulk custom projects | Support custom finish and size adjustments for hospitality or residential furnishing projects |
EU Market Access Requirements* EN Standards
| EN 15372:2016 | Furniture - Strength, durability and safety for non-domestic tables | |
|---|---|---|
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applies to tabletop substrate | |
|---|---|---|
| GB/T 4893.9-2013 | Furniture surface test for impact resistance, applies to tabletop finish | |
| GB/T 1732-1993 | Paint film impact resistance test, applies to metal base finish |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applies to tabletop substrate; 2. GB/T 4893.9-2013: Furniture surface test for impact resistance, applies to tabletop finish; 3. GB/T 1732-1993: Paint film impact resistance test, applies to metal base finish; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
