Asymmetric Cantilevered Round Brushed Brass Side Table with Cylindrical White Marble Base (model ST-CB460-WMB) is listed under Pedestal Side Table. Dimensions: 460 × 460 × 610 mm. Materials: 3mm thick spun brass with radial brushed finish, clear protective lacquer. Load capacity: 36 kg. Product Features: modern,sculptural,style,fixed-height,cantilever,structure,metal,and,natural,stone,construction. This page consolidates 6 groups of specifications, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | JUESHANGDA | Model | ST-CB460-WMB |
| Overall dimensions (W × D × H) | 460 × 460 × 610 mm | Round tabletop diameter | 460 mm |
| Tabletop material thickness | 3 mm | Cylindrical marble base diameter | 230 mm |
| Cylindrical marble base height | 450 mm | Vertical brass support rod diameter | 38 mm |
| Support rod offset from base center | 105 mm | Undertable clearance height | 140 mm |
| Floor contact glide diameter | 30 mm | Primary Component Thickness | 40 mm according to load-bearing role |
| Hardware / Moving-part Clearance | 5 mm operating clearance | Recommended static top load | 36 kg |
| Total product net weight | 8.4 kg | Marble base static stability load | 85 kg |
| Clamp fastener shear strength | 50 kg | Surface abrasion resistance (brass top) | 5000 cycles |
| Marble surface stain resistance | Level 3 | Reference Static Load | 150 kg depending on category |
| Moving-part Durability Reference | Acceptance target 50000 cycles | Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
| Tabletop | 3mm thick spun brass with radial brushed finish, clear protective lacquer | Support rod | Seamless cylindrical brass tube with matching brushed gold finish |
| Clamp fasteners | Solid brass hexagonal clamp bolts securing rod to marble base | Weight base | Solid natural white marble cylinder with grey natural veining, polished finish |
| Base bottom glides | Non-marking polyethylene floor protection pads affixed to base underside | Tabletop edge treatment | Smooth deburred rounded brass edge 1mm radius |
| Marble base sealant | Penetrating stone sealer applied to polished marble surfaces | Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints |
| Reference Finish / Color Count | Recommended 6finish options | Height adjustment | Fixed 610mm working height, no adjustable mechanism |
| Cantilever design | Offset support leaves unobstructed open space beside the marble base | Surface utility | Flat circular top supports drinks, small table lamps, books or decorative objects |
| Floor protection | Underside glides prevent scratches to hard flooring surfaces | Assembly method | Knock-down assembly requiring clamp tightening to attach support rod to base |
| Stability mechanism | Solid marble base provides counterweight for cantilevered tabletop overhang | Cleaning access | Smooth non-porous finished surfaces allow quick wipe-clean maintenance |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable | Reference Package Count | 1 set / 2 cartons |
| Reference Assembly Time | 40 minutes per set | Reference Packaging Volume | 0.8 m³/set |
| Reference Packaged Gross Weight | 120 kg/set | Residential living room placement | Position beside sofas or lounge chairs as an accent end table |
| Bedroom use | Place next to bedside as a compact nightstand for small items | Commercial lounge application | Suitable for hotel lobbies, waiting areas and boutique seating zones |
| Surface load suitability | Designed for light decorative and functional items, not heavy equipment | Style compatibility | Pairs with modern, minimalist, mid-century or glam interior design schemes |
| Hard floor compatibility | Non-mar glides are safe for wood, tile, vinyl and polished stone floors | — | — |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 460 × 460 × 610 mm | |
|---|---|---|
| Round tabletop diameter | 460 mm | |
| Tabletop material thickness | 3 mm | |
| Cylindrical marble base diameter | 230 mm | |
| Cylindrical marble base height | 450 mm | |
| Vertical brass support rod diameter | 38 mm | |
| Support rod offset from base center | 105 mm | |
| Undertable clearance height | 140 mm | |
| Floor contact glide diameter | 30 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended static top load | 36 kg | |
|---|---|---|
| Total product net weight | 8.4 kg | |
| Marble base static stability load | 85 kg | |
| Clamp fastener shear strength | 50 kg | |
| Surface abrasion resistance (brass top) | 5000 cycles | |
| Marble surface stain resistance | Level 3 | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop | 3mm thick spun brass with radial brushed finish, clear protective lacquer | |
|---|---|---|
| Support rod | Seamless cylindrical brass tube with matching brushed gold finish | |
| Clamp fasteners | Solid brass hexagonal clamp bolts securing rod to marble base | |
| Weight base | Solid natural white marble cylinder with grey natural veining, polished finish | |
| Base bottom glides | Non-marking polyethylene floor protection pads affixed to base underside | |
| Tabletop edge treatment | Smooth deburred rounded brass edge 1mm radius | |
| Marble base sealant | Penetrating stone sealer applied to polished marble surfaces | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Height adjustment | Fixed 610mm working height, no adjustable mechanism | |
|---|---|---|
| Cantilever design | Offset support leaves unobstructed open space beside the marble base | |
| Surface utility | Flat circular top supports drinks, small table lamps, books or decorative objects | |
| Floor protection | Underside glides prevent scratches to hard flooring surfaces | |
| Assembly method | Knock-down assembly requiring clamp tightening to attach support rod to base | |
| Stability mechanism | Solid marble base provides counterweight for cantilevered tabletop overhang | |
| Cleaning access | Smooth non-porous finished surfaces allow quick wipe-clean maintenance | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential living room placement | Position beside sofas or lounge chairs as an accent end table | |
|---|---|---|
| Bedroom use | Place next to bedside as a compact nightstand for small items | |
| Commercial lounge application | Suitable for hotel lobbies, waiting areas and boutique seating zones | |
| Surface load suitability | Designed for light decorative and functional items, not heavy equipment | |
| Style compatibility | Pairs with modern, minimalist, mid-century or glam interior design schemes | |
| Hard floor compatibility | Non-mar glides are safe for wood, tile, vinyl and polished stone floors |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp