Product supplierMonolithic Smoked Tinted Glass Geometric L-Shaped Coffee Table, 19mm smoked grey tempered safety glass
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1100 × 920 × 450 mm | |
|---|---|---|
| top surface thickness | 19 mm | |
| vertical side panel thickness | 19 mm | |
| under-table clearance | 0 mm | |
| top edge miter width | 10 mm | |
| front vertical panel width | 800 mm | |
| side recess depth | 300 mm | |
| floor contact footprint | 1000 x 820 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| net product weight | 68 kg | |
|---|---|---|
| distributed top static load capacity | 68 kg | |
| glass impact resistance grade | ANSI Z97.1 compliant safety tempered | |
| surface vertical load per point | 20 kg | |
| surface scratch resistance | 6H pencil hardness | |
| warranty period | 2 years | |
| available finish variants | 4 finishes | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| top surface | 19mm smoked grey tempered safety glass | |
|---|---|---|
| vertical support panels | 19mm matching smoked tempered glass | |
| edge finish | Precision mitered polished glass edges | |
| joint adhesive | Structural UV-cured glass adhesive | |
| floor contact pads | 3mm thick EVA anti-slip pads | |
| glass tint opacity | 70% light transmission | |
| surface coating | Fingerprint-resistant nano-coating | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| table form | Fixed monolithic block, no moving parts or adjustable components | |
|---|---|---|
| object placement | Flat level top surface for drinks, decor, books and media items | |
| floor protection | Underside anti-slip pads prevent scratching hard flooring | |
| cleaning access | Smooth non-porous glass surface wipes clean with soft microfiber cloth | |
| structural stability | Low center of gravity from solid glass base prevents tipping | |
| assembly requirement | Fully pre-assembled at factory, no on-site assembly needed | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| primary use space | Contemporary residential living rooms, positioned centrally in seating groups | |
|---|---|---|
| secondary use space | Modern office lounge reception areas for decor and guest refreshment placement | |
| design style compatibility | Minimalist, contemporary, brutalist, and modern luxury interior schemes | |
| user group | Design-focused residential consumers and commercial interior design projects | |
| floor surface suitability | Hardwood, tile, polished concrete, and low-pile carpeted floors | |
| paired furniture recommendation | Low-profile modular sofas, boucle lounge chairs, and curved accent seating |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
No standards data is available for this market.
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool