Product supplierBlack Metal Dual-Tier Offset Round Cantilever Side Table, Cold-rolled steel with matte black powder coating
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 660 × 400 × 660 mm | |
|---|---|---|
| Upper tabletop diameter | 400 mm | |
| Lower tabletop diameter | 350 mm | |
| Cylindrical base diameter | 250 mm | |
| Cylindrical base height | 350 mm | |
| Upper tabletop height from floor | 660 mm | |
| Lower tabletop height from floor | 480 mm | |
| Support arm tube diameter | 25 mm | |
| Central vertical post diameter | 30 mm | |
| Under-table clearance beneath lower top | 455 mm | |
| Tabletop material thickness | 25 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Net product weight | 7 kg | |
|---|---|---|
| Static load per tabletop | 14 kg | |
| Total static load capacity | 23 kg | |
| Base static stability load | 68 kg | |
| Finish abrasion resistance | 1000 cycles | |
| Warranty period | 1 year | |
| Available finish color count | 4 | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Cylindrical base | Cold-rolled steel with matte black powder coating | |
|---|---|---|
| Central support post | Welded steel tube with matching black powder coating | |
| Cantilever support arm | Bent seamless steel tube with black powder coating | |
| Round tabletops | Solid cold-rolled steel plates with smooth matte black finish | |
| Tabletop edge treatment | Laser-cut smooth rounded edge with deburred finish | |
| Base floor glides | Injection-molded non-slip plastic feet | |
| Weld joint construction | Ground smooth welded connections at all tube junctions | |
| Coating performance | Rust-resistant matte powder topcoat | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Dual-tier surface layout | Two horizontally offset round tops at staggered heights for flexible item placement | |
|---|---|---|
| Freestanding installation | Single cylindrical weighted base provides anti-tip stability without wall mounting | |
| Floor protection | Non-scratch plastic glides on base bottom prevent hard floor scratching | |
| Assembly requirement | Knock-down assembly with 3 connection points between base, post and arm | |
| Surface utility | Smooth non-porous metal tops support drinks, decor, books or small electronics | |
| Compact footprint design | Small 250mm diameter base fits tight spaces beside sofas, beds or lounge chairs | |
| Fixed height structure | Permanent tier height positions with no adjustment mechanisms | |
| Cleaning compatibility | Smooth coated metal surfaces wipe clean with dry or damp soft cloth | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Living room placement | Position beside sofas or armchairs to hold drinks, remotes and small decor | |
|---|---|---|
| Bedroom use | Serve as a nightstand for bedside lamps, phones and reading materials | |
| Office lounge placement | Place next to reception seating or breakroom lounge chairs for guest convenience | |
| Small space application | Ideal for studio apartments or compact entryways where floor space is limited | |
| Contemporary interior fitouts | Suits modern, minimalist or industrial design schemes with matte black metal finish | |
| Balcony/covered patio use | Powder-coated metal finish resists light moisture for semi-outdoor placement |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
No standards data is available for this market.
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool