| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 800 x 800 x 760 mm | |
|---|---|---|
| Tabletop thickness | 23 mm | |
| Flared base floor contact diameter | 480 mm | |
| Brushed brass upper cylinder height | 100 mm | |
| Under-table knee clearance height | 680 mm | |
| Brass base trim ring width | 15 mm | |
| Round polished tabletop edge radius | 12 mm | |
| Central column outer diameter | 80 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed static tabletop load capacity | 200 kg | |
|---|---|---|
| Recommended seating capacity | 2 persons | |
| Tabletop surface scratch resistance rating | 6H pencil hardness | |
| Tabletop heat resistance threshold | 180 °C | |
| Net product weight | 34 kg | |
| Recommended warranty period for residential use | 12 months | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop surface layer | 23mm white veined sintered stone | |
|---|---|---|
| Tabletop support substrate | 15mm high-density MDF backing board | |
| Conical pedestal main body | 1.5mm thick powder-coated matte black carbon steel | |
| Upper connecting cylinder | Brushed brass-plated stainless steel | |
| Floor contact trim ring | Brushed brass-plated stainless steel | |
| Floor protection pads | 5mm thick non-slip felt pads | |
| Connection hardware | Zinc-plated steel bolts and locking nuts | |
| Surface coating thickness on metal base | 80 micron matte powder coat | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| 360-degree unobstructed leg clearance | Full perimeter knee space with no cross-braces | |
|---|---|---|
| Floor protection design | Felt pads under base trim prevent hard floor scuffing | |
| Assembly structure | Knock-down construction with 3 connecting bolts | |
| Tabletop cleaning property | Non-porous surface resists staining from daily spills | |
| Stability design | Flared conical base lowers center of gravity to reduce tipping | |
| Placement adaptability | Suits tight dining nooks, cafe seating, and small apartment spaces | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Small apartment dining nook | Compact 800mm diameter fits limited floor space for 2 diners | |
|---|---|---|
| Commercial cafe bistro seating | Durable stone top withstands daily high-traffic food service use | |
| Office reception breakout area | Serves as informal meeting or refreshment table for staff/guests | |
| Hotel guest room dining area | Compact scale suits studio guest room supplementary dining setup | |
| Balcony casual dining space | Stable pedestal design works for small outdoor covered balcony seating | |
| Show home display furnishing | Contemporary brass-accent design matches modern light luxury interior schemes |
EU Market Access Requirements* EN Standards
| Domestic furniture safety standard | EN 12521:2015 | |
|---|---|---|
| Surface resistance to cold liquids | EN 12720:2009+A1:2013 |
Standards applicable to China-market projects
| Table stability test standard | GB/T 10357.2 | |
|---|---|---|
| Tabletop surface durability standard | GB/T 4893.4 | |
| Formaldehyde emission limit | GB 18584 |
This product must meet the following technical requirements: 1. Table stability test standard: GB/T 10357.2; 2. Tabletop surface durability standard: GB/T 4893.4; 3. Formaldehyde emission limit: GB 18584; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
