Product supplierRound Marble Top Accent Side Table with Brass Walnut Hourglass Pedestal, 20mm polished white engineered marble/sintered stone with natural grey veining
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 600 × 600 × 610 mm | |
|---|---|---|
| Tabletop diameter | 600 mm | |
| Tabletop thickness | 20 mm | |
| Edge metal trim thickness | 8 mm | |
| Upper brass pedestal height | 290 mm | |
| Lower walnut base height | 300 mm | |
| Floor contact base diameter | 380 mm | |
| Pedestal waist diameter | 80 mm | |
| Table edge overhang from pedestal | 10 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Tabletop static load capacity | 50 kg | |
|---|---|---|
| Total product net weight | 15 kg | |
| Floor contact load distribution | 0.004 MPa | |
| Recommended placed item diameter | 350 mm | |
| Tilt stability angle | 15 degrees | |
| Surface abrasion resistance | 4000 cycles | |
| Structural warranty period | 1 year | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop panel | 20mm polished white engineered marble/sintered stone with natural grey veining | |
|---|---|---|
| Table edge trim | 8mm brushed brass-plated stainless steel with polished gold finish | |
| Upper pedestal section | 1.5mm thick brass-plated cold-rolled steel, brushed satin gold finish | |
| Pedestal connection fitting | Concealed zinc alloy threaded joint at waist between upper and lower sections | |
| Lower base section | 18mm thick MDF core with dark walnut wood veneer, matte lacquer seal | |
| Floor contact pad | 5mm thick non-slip EVA foam pads bonded to base bottom edge | |
| Metal finish coating | Electroplated brass finish with anti-tarnish clear topcoat | |
| Wood base finish | Low-VOC matte polyurethane lacquer, 3 coats | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Surface placement function | Flat level round top holds drinks, table lamps, small decorative objects next to seating | |
|---|---|---|
| Assembly requirement | Fully assembled unit with no user assembly required | |
| Stability design | Weighted conical lower base lowers center of gravity to prevent tipping | |
| Floor protection | Concealed non-slip pads under base eliminate scuffs on hard wood/tile floors | |
| Surface maintenance | Non-porous sealed tabletop wipes clean with soft dry or damp cloth | |
| Placement compatibility | Compact footprint fits in narrow gaps between sofa and wall, or beside armchairs | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Packaged carton dimensions | 650 x 650 x 700 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Luxury bedroom application | Place next to upholstered beds as a decorative nightstand for table lamps | |
|---|---|---|
| High-end lounge and reception area use | Deploy in hotel lobbies, VIP waiting areas, or boutique lounge zones | |
| Show home and model suite staging | Use as a sculptural accent piece in curated interior design displays | |
| Small apartment flexible furnishing | Suitable for compact urban living spaces requiring multi-use small surface areas |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
No standards data is available for this market.
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool