| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 550 x 550 x 550 mm | |
|---|---|---|
| Tabletop thickness | 12 mm | |
| Tabletop overhang | 20 mm | |
| Metal tube profile | 25 x 25 mm | |
| Under-table clearance height | 510 mm | |
| Cross brace vertical height | 275 mm | |
| Foot glide contact pad diameter | 30 mm | |
| Internal cube frame opening width | 500 mm | |
| Primary Component Thickness | 40 mm according to load-bearing role | |
| Hardware / Moving-part Clearance | 5 mm operating clearance |
Net weight / load capacity / users / durability
| Tabletop static load capacity | 113 kg | |
|---|---|---|
| Product net weight | 10 kg | |
| Frame static load rating per leg | 35 kg | |
| Surface heat resistance | 120 °C | |
| Surface abrasion resistance | 4000 cycles | |
| Recommended maximum placed object weight | 50 kg | |
| Powder coating scratch resistance | 2H pencil hardness | |
| Reference Static Load | 150 kg depending on category | |
| Moving-part Durability Reference | Acceptance target 50000 cycles | |
| Recommended Procurement Warranty | Structure 5 years; hardware 3 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop material | 12mm thick sintered stone with white marble vein finish | |
|---|---|---|
| Frame construction | 25x25mm square steel tube with matte black powder coating | |
| Cross bracing | Matching 25x25mm square steel tube, welded at mid-frame joints | |
| Frame connection hardware | Zinc-plated steel hex bolts and lock washers | |
| Floor protection pads | Non-marking TPE rubber glides bonded to frame base corners | |
| Tabletop edge treatment | Smooth polished micro-bevel edge, no sharp corners | |
| Frame coating property | Rust-resistant matte powder coat suitable for dry indoor use | |
| Primary Connector Specification | Reference M6-M10 with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
Adjustment / rotation / tilt / mobility / storage features
| Frame stability design | Mid-height horizontal and vertical cross bracing reduces frame flex | |
|---|---|---|
| Floor protection function | TPE glides prevent scratches on hard floors and low-pile carpet | |
| Surface maintenance | Non-porous tabletop wipes clean with damp cloth, no sealant required | |
| Assembly requirement | Flat-pack assembly with included hex key, no specialized tools needed | |
| Under-table tuck design | Full open lower frame allows sliding partially under sofa overhang | |
| Frame leveling function | Adjustable glides compensate for uneven floor surfaces up to 5mm | |
| Reference Adjustment / Operating Range | 100 mm or 120° where applicable |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Packaging Volume | 0.8 m³/set | |
| Reference Packaged Gross Weight | 120 kg/set |
Recommended spaces / users / usage modes
| Living room sofa side placement | Sits next to armrest for drinks, books, remote controls and table lamps | |
|---|---|---|
| Bedroom bedside use | Functions as nightstand for lamps, phones, alarm clocks and small decor | |
| Office lounge accent placement | Serves as guest side table next to lounge seating in reception areas | |
| Balcony casual use | Holds small potted plants and drinks for residential balcony seating | |
| Small corner filler use | Fits empty corners between seating groups for decorative object display | |
| Pairing configuration | Can be purchased in pairs for placement at both ends of a sofa |
EU Market Access Requirements* EN Standards
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
